Here you will find everything that the designer needs for his design and the development engineer for his new development, from the draft to quality assurance in production, such as new products, their applications, new technologies or research results. Company reports as well as topics on technological and megatrends in all industrial sectors complete our range of industry news. Let's start with the news.
The Schmersal Group announces that it is restructuring its service division and establishing Tec.nicum - Solutions & Services GmbH. The company is thus significantly expanding its safety service offering.
Federal Minister of Economics Dr. Robert Habeck visited the Turck Group at the Hannover Messe 2024 to find out how the automation specialist contributes to sustainability in the industry.
Igus is presenting the new business figures and presenting 2024 new products at the Hannover Messe 247 and would like to advance the goal of “Zero Lubrication” with the Igus Go app.
IFM Electronic was able to increase sales again in the 2023 financial year. The preliminary consolidated financial statements show a new sales record with sales of over 1,4 billion euros and growth of 3%.
Jumo has designed further training courses with a view to the currently exciting topics being discussed in individual sectors and offers corresponding seminars as part of the Jumo Campus.
AREAS OF EXPERTISE
Drive Technology
Automation
Electrical Engineering
Fluid Technology
Machine Elements
Measurement Technology
Product development
Connection Technology
Materials + Techniques
Industry news for your design and development from the specialist areas
As a networked industrial ecosystem, the exhibitors demonstrate how climate neutrality can be achieved through the use of electrification, digitalization and automation under the guiding theme of Energizing a sustainable Industry.
Control 2024, the important international trade fair for quality assurance, will take place from April 23rd to 26th in Stuttgart. The trade fair places a particular focus on automation and digitalization.
The SPS – Smart Production Solutions from November 14th to 16.11th. 2023 will see significant growth in the trade fair compared to the previous year and is on the way to pre-Corona levels.
Energy chain systems defy dust and dirt in alumina production
Details
Hits: 8439
During the mining and subsequent storage of bauxite, a sedimentary rock used to produce aluminum oxide, a lot of dust is formed, which poses a major challenge, especially for the moving machine parts of the conveyor units. The aluminum oxide producer AOS uses energy chains from in its plants Igus on. For several years now, they have reliably supplied power units and stockpiles with energy, data and media.
Aluminum oxide and hydroxide are basic materials used to make a wide variety of aluminum products that are needed all over the world. The production of these substances requires bauxite - a reddish sedimentary rock that is mined primarily in Australia, China and South America. From there, it is shipped by sea to Germany, for example, to the Aluminum Oxide Stade GmbH (AOS), one of the major aluminum oxide producers in Germany. The company processes around 2 million t of bauxite annually, from which around 1 million tons of alumina can be extracted.
A single ship delivers up to 70.000 t of raw material to AOS 'own port. From there, it is transported by ship unloading crane via an encapsulated conveyor belt system for intermediate storage before it is processed from there. Both during loading and unloading of ships as well as during storage, AOS today relies on the conveyor units for reliable energy guidance systems from the motion plastics specialist Igus. Because the high dust load during the movement of bauxite is an enormous burden, especially for moving machine components.
"In the past, we used motor cable drums for the power supply," recalls Fabian Wilhelm, Head of Electrical Power Engineering at AOS. "Here again and again we had the problem that the lines were not drummed correctly, which resulted in machine failure due to line damage."
Initial skepticism is followed by trust
Since the previously used energy supplies required a lot of maintenance and always caused problems, Fabian Wilhelm decided in 2012 to convert to an energy chain system from igus for the first time. "At that time, Mr. Böhm from igus introduced me to the principle of energy chains," he explains. “I was initially skeptical as to whether the chains would also work in this environment.
But after we were able to look at a seaport and an aerated concrete plant as reference applications and had the opportunity to talk to other customers and users, we decided in favor of the Cologne chains.” The references visited are – as is the case with AOS – in each case applications with travel distances of more than 100 m or applications in coarse dust and dirt. In particular, the stress caused by the abrasive salt dust in the seaport is very demanding for the systems.
First joint project: Extreme load grinding machine
The first joint project was the so-called 'loop car'. When it comes to particularly dusty bauxite, it is not stored in a heap under the open sky, but in a large hall to reduce the dust load on the environment. In this hall, the loop car moves back and forth under the roof of the hall over a distance of just under 140 m, in order to vary the discharge point of the bauxite. While there are up to 60 ° C in summer, the winter conditions are much more difficult.
"If the warmer bauxite from 20 meters height is transported to the cold heap, the temperature difference causes condensation," reports Fabian Wilhelm. "This rises and becomes liquid again on the roof of the hall, which causes it to start to rain inside the hall. Moisture coupled with the bauxite dust results in a stubborn slag that sticks everywhere and also affects the path of the energy channel. "This is where the Igus energy chain system adds another benefit, as all AOS applications also include electronic traction / thrust monitoring is installed.
"If the run of the chain is hampered too much by dust and dirt, the train / thrust monitor will shut down the system before any damage occurs," explains Fabian Wilhelm "Since Igus was the only provider to offer such an electronic surveillance system This is one of the main reasons for the contract. If today the monitoring turns off the system, we know that it is time again to clean the chain travel. Then the system will run again without any problems. "The option of being able to carry compressed air in addition to data and energy was another convincing factor.
Second joint project: Overhaul dumping machine
Only a short time after the first successful retrofitting AOS decided in the course of a major overhaul of the dumping device again for an energy chain system from Igus. Here - under the open sky - lands the bauxite, which does not have to be stored in the hall. Also in this project AOS relied on the support of the Cologne assembly service, which has taken over the complete installation of the chain and the gutter system in which the chain is moved. "The special feature of all projects here has always been the good cooperation with the customer," explains Markus Böhm, Technical Sales Advisor at Igus. "The work was very well intermeshed and if the assembly work required mutual support, it was perfectly implemented."
The stockpile will now be supplied by the longest e-chain in use at AOS. A 330RHDAX roller energy chain travels on a traverse path of 5050 m. "By rolling in the chain links, the pulling / pushing forces on long travel paths drop enormously when the upper run of the chain drops on the lower run," explains Markus Böhm. "This reduces the coefficient of friction and can save up to 57 percent of the drive energy required to move the energy chain system." The 'AX' in the product name stands for 'outboard stops'. The fact that the attacks are not as usual inside between the chain links, the dust can not settle so much in the attacks. Because this could possibly influence the bending radius of the chain and lead to failures.
In addition to various lines for the supply of energy and data, which are also produced by the plastics specialist and have been specially developed for use in e-chains, there is also a water hose with 48 mm diameter in the chain at the stockpile to irrigate the bauxite. In addition, a floating carrier ensures a lateral tolerance compensation and ensures undisturbed movement. Especially on long travels this is necessary in order to save on the one hand drive energy and on the other hand compensate for possible parallelism errors between running rail and guide trough.
Third joint project: ship loading and unloading
In the most recent joint project in 2017, two energy chains move in opposite directions on a travel distance of 218 m in a common channel. They supply the two cranes that deliver the bauxite and remove the aluminum oxide produced. Medium-voltage motor cables from the "Cfcrane" series and fiber optic cables from the CFLG series are also routed here. “This is a real advantage for us,” confirms Fabian Wilhelm. “In the past, when the crane failed or for maintenance purposes, we always had to climb 40 meters up onto the crane with a laptop to read it out. Today, thanks to the fiber optic connection, this can be done directly from your desk. This makes the maintenance work much easier for us. "
In the past, motorized cable reels were also used for these two applications. However, these always caused problems, since standstill motors had to be operated, which always kept the cables of the motorized cable reel under tension.
"In the past, the starting resistors on the motors used to rust and had to be replaced," recalls Fabian Wilhelm. “This meant ten days of standstill. And we only have one unloading crane that can handle around 50 ships per year. Therefore, a failure weighs very heavily and must be avoided at all costs. Today, thanks to the energy chain systems, we naturally have a longer service life and also significantly less maintenance.”
Maintenance at AOS is also carried out by Igus experts. "Once a year, we check all the chains according to our maintenance manual and carry out visual inspections," explains Markus Böhm. "The first chain on the loop car has been in use for over five years now. Here at the last inspection we did not notice any significant signs of wear - despite the very heavy conditions under the hall roof. "This also applies to the other systems in use. In addition to this, Fabian Wilhelm summarizes: "Less maintenance, higher availability, the possibility to run all different lines and hoses in one system, the electronic traction / push force monitoring ... all these advantages convinced us completely of Igus. I would take these energy chains again and again. "