Tractors, combine harvesters and seed drills are exposed to wind, weather and dirt every day. Damage or signs of wear and tear are therefore preprogrammed and often have to be repaired directly in the field, and not infrequently with a variety of challenges. Reliable, mobile and versatile welding systems are an important support in this case. Fronius offers several devices for these challenges.

Welding a clean seam in a protected room with a stable power supply requires a lot of practice. However, in order to be able to maintain or repair even under more adverse circumstances - be it the lack of electricity access, rough terrain or the welding task itself - welding equipment must fulfill special criteria. Fronius offers several devices that are easy to use, robust, powerful and mobile at the same time: for example "Transsteel", "Transpocket" and "Accupocket".

All three welding power sources can be operated intuitively and, thanks to digital control, enable a stable arc and reproducible welding results. The underlying software can be updated via updates, allowing users to benefit from new or enhanced welding processes without having to invest in a new device. Splash protection (IP23 protection) and longevity are other benefits offered by this series. The manufacturer tests the durability of its devices in endurance tests whose requirements go far beyond the standards.

Ready to use everywhere

The MMA and TIG devices Transpocket and Accupocket are particularly useful when it comes to mobile and flexible use in welding: The Accupocket is suitable for mobile use: the system weighs just 11 kg including the lithium-ion battery. in the BatteryIn operation, the energy required is drawn exclusively from the battery. When fully charged, the welding machine can weld up to eight 3,25 mm electrodes or 18 electrodes with a diameter of 2,5 mm.

The hybrid mode makes it possible to access the battery and power supply via the mains or generator at the same time. The power reserves of the battery compensate for voltage fluctuations and prevent the mains fuse from dropping in the event of overvoltage. The electricity can also be obtained exclusively from the grid. Due to the low power consumption, a much smaller current transformer with 2 instead of 8 kVA is sufficient.

Potato harvester reliable again after conversion from freewheel

If, like the particularly robust Transpocket, there is no battery for voltage compensation, PFC (power factor correction) technology is used. It uses existing network power efficiently and avoids reactive power. To do this, an automated power factor correction models the input current to have a nearly ideal sinusoidal shape. This technology guarantees a stable arc by compensating for voltage fluctuations. Such fluctuations can occur, for example, in generator operation, for which the single-phase welding devices are designed.

Both welding power sources have features such as soft start, hotstart and anti-stick. These stabilize the arc, facilitate the ignition and prevent the annealing of the electrode. The technician in the mobile service, these programs help to produce a high quality welding result.

MIG / MAG, TIG and E-hand welding

Multiprocess devices such as the Transsteel, with which MIG / MAG, TIG and MMA welding can be performed, are suitable for a wide range of welding tasks. A big plus of the single-phase power source is the large number of characteristics, including for aluminum and copper-silicon alloys. The Transsteel also has a second gas solenoid valve which simplifies the process change from MIG / MAG to TIG. It is also easy to use - the user is ready to weld in just three steps. All he has to do is enter the additional material to be welded, the wire diameter and the gas used.

Other special features are the TAC function and puncture and interval welding. TAC helps to set stitching points: so that the two molten baths connect to one another, the pulsed arc sets them in motion. The function is also helpful when welding thin sheets without additional material. Also intended for joining thin sheets is the puncture and interval welding, since the heat input is lower here.

Regardless of the choice of welding power source - they need to be brought to the job site. Fronius offers the appropriate "Case" tool not only for the device but also for the necessary accessories for professional use on site.

Another contribution of the manufacturer 

You might also be interested in...

Safety coupling protects non-destructive tunnel boring machines

Two tunnel boring machines are the largest machines on the Semmering Base Tunnel construction site. For her...

Real-time simulation software for mechatronic machines

Altair announces the expansion of the Altair Partner Alliance (APA) to include the advanced visualization and real-time...

Ready-to-install slew drives in a particularly flat design

Rodriguez offers slew drives as ready-to-install assemblies with housing and seal as well as optional electrical ...

Sensor technology for precision farming, smart farming, agriculture

The next stage of development in agriculture is data-driven and requires robust sensor technology in the field. With...