electronic components for developers
Electronic components for electrical circuits such as capacitors, diodes, resistors, coils, transistors, relays or terminals
electronic components for developers
Electronic components for electrical circuits such as capacitors, diodes, resistors, coils, transistors, relays or terminals
Control cabinets for machines and systems
Control cabinet and housing Innovations for electrical and electronic components of machines and systems in modern production
Image: Phoenix Contact
Cables & wires: veins of industry
The cable becomes a high-tech component in the industrial environment and is therefore suitable for e.g. B. Single Pair Ethernet or CAT6e technology
Image: Igus
Cable & Wire Connectors
Single pair Ethernet connectors, push-pull connectors, miniature connectors or rectangular connectors for machines and systems
Image: Harting
Power supply mobile and stationary
Overvoltage protection, voltage converters, supply components, EMC filters and power consumption measurement for uninterruptible power supplies
Image: Weidmuller
You will find many new products from the Electrical Engineering and Electronics for the bloodstream in the Industry 4.0 Factory. We report on components, systems and technologies of the electronic components, Cables, wires, switch cabinet, about Connectors, Power Supply and much more. You can also find out interesting facts about Future technologies like Single-pair Ethernet, IIoT or single-cable motor technology for modern mechanical engineering and smart system technology.
Contents
The electrical engineering, electronics is the second largest industry in Germany according to the number of employees and ranks with a high export content right behind machine and plant engineering. And it is a stronghold of Middle class. Over 90 percent of the companies that are active in the electrical engineering and electronics sector employ fewer than 500 people. On the way to Industry 4.0, industrial goods are increasingly being equipped with electrical engineering or electronics.
For industries like for example the Automotive industry, Renewable energies, Technical Building Services, Medical Technology, food technology, Microsystems Technology, Mobile Machinery Products must meet special requirements such as approvals, certificates or surfaces and material properties. Here we present you the latest innovations from industry solutions and from the Applied research .
Digitization, integration, networking, monitoring: These are the Industry 4.0 requirements that are also driving electrical engineering and electronics in mechanical and plant engineering. And so connectors and cables are more than just one today electrical connection technology. We present the innovations below:
Buttons that are used as operating elements on high-quality machines and devices must have good tactility in addition to high switching reliability and a long service life. This includes an actuation force appropriate to the application and the field of application in order to avoid incorrect operation and at the same time guarantee pleasant operability with clear feedback. The micro pushbuttons of the Micon 5 series from Rafi were created for these requirements.
Maxpower Semiconductor has expanded its product portfolio around a series of MOS-based Rectifiers expanded with very high current density. They have an ultra low Forward voltage. With these properties of current density and forward voltage, they are particularly suitable for use in high-frequency switched-mode power supplies such as DC / DC converters, adapters, reverse polarity protection circuits or lighting.
Raw brings new high-power shunt resistors on the market. A low-ohm resistor of the GMR320 version has a nominal power of 10 W. The new design offers the highest nominal power of the GMR resistors, which are for high-power applications in industrial plants, the Automotive industry or household appliances. In the case of the extremely low-ohmic resistors of the PSR series, the nominal power has also been increased to 15 watts.
SMP Sintermetalle Prometheus has developed "All Mode" EMC filters with high frequency stability. The specially produced HFCM materials (High Frequency Composite Materials) are effective for frequencies up into the gigahertz range and meet all the requirements of modern SiC and GaN applications. The all mode construction dampens both differential mode and common mode disturbances.
Turck is expanding its pick-to-light portfolio with the K50-Flat illuminated pushbutton from its opto partner Banner Engineering. Due to its low height of 69 mm, the robust IP17K button is suitable for installation in confined spaces. Light touches without pressure with fingers or palm are sufficient to trigger.
Hy-Line Power Components presents its supercapacitors with a nominal voltage of 3,8 V. The HS series offers up to ten times the capacity with the same size. The new hybrid supercapacitor combines the properties of a super capacitor and a lithium battery.
Werma Signaltechnik brings the new multicolour luminaire 240 onto the market. The LED built-in light is a compact signal device with up to seven colors. In addition, with the systems for process optimization, the company shows that there is a practical answer to the challenging questions about Industry 4.0, digitization and networking.
Maxpower has developed its first generation of rectifier diodes with an unprecedented combination of performance parameters. The Max SBR diode combines the low forward voltage drop and the nonexistent reverse recovery charge of a Schottky diode with the surge voltage resistance and the low reverse leakage current of normal pn junction diodes. These Super barrier diodes are largely insensitive to high temperatures. The diodes are sold in Europe Fine power.
Heraeus Electronics represents a new material for the next generation of power Electronics in front. The Powercusoft product family is expanded to include a Copper bond ribbon expanded. With it, power modules can be designed and manufactured more reliably, effectively and cost-effectively.
Keysight Technologies introduces a new line of one- and two-channel power supplies that offer more usable performance, an ergonomic design with low background noise, a small size and a large display. With the E36200 series, developers can test their product designs, such as products from automotive electronics, consumer goods, medical devices, power tools and industrial applications.