Here you will find everything that the designer needs for his design and the development engineer for his new development, from the draft to quality assurance in production, such as new products, their applications, new technologies or research results. Company reports as well as topics on technological and megatrends in all industrial sectors complete our range of industry news. Let's start with the news.
Federal Minister of Economics Dr. Robert Habeck visited the Turck Group at the Hannover Messe 2024 to find out how the automation specialist contributes to sustainability in the industry.
Igus is presenting the new business figures and presenting 2024 new products at the Hannover Messe 247 and would like to advance the goal of “Zero Lubrication” with the Igus Go app.
IFM Electronic was able to increase sales again in the 2023 financial year. The preliminary consolidated financial statements show a new sales record with sales of over 1,4 billion euros and growth of 3%.
Jumo has designed further training courses with a view to the currently exciting topics being discussed in individual sectors and offers corresponding seminars as part of the Jumo Campus.
Schaeffler AG's sales increased by 2023% to EUR 5,8 billion in 16,3. Currency-adjusted sales growth was 5,8 percent, which is within the forecast for the 2023 financial year.
AREAS OF EXPERTISE
Drive Technology
Automation
Electrical Engineering
Fluid Technology
Machine Elements
Measurement Technology
Product development
Connection Technology
Materials + Techniques
Industry news for your design and development from the specialist areas
As a networked industrial ecosystem, the exhibitors demonstrate how climate neutrality can be achieved through the use of electrification, digitalization and automation under the guiding theme of Energizing a sustainable Industry.
Control 2024, the important international trade fair for quality assurance, will take place from April 23rd to 26th in Stuttgart. The trade fair places a particular focus on automation and digitalization.
The SPS – Smart Production Solutions from November 14th to 16.11th. 2023 will see significant growth in the trade fair compared to the previous year and is on the way to pre-Corona levels.
Non-cutting thread former for cast aluminum alloys
Details
Hits: 4881
With two newly developed tapping-Tools expanded Rhymes Noris his product portfolio for Aluminum wrought alloys and Cast aluminum alloys, Both tool types, like all thread formers of the "NEO" series, are made from HSSE-PM substrate. However, they differ in properties such as geometry and coating in order to achieve outstanding results in the respective area of application.
The "Spanlos NEO GAL" thread former was specially developed for thread forming in relatively difficult to form aluminum cast alloys. The geometry has a steep stroke. It is symmetrical in the forming direction and on the back. The specialty of the tap for the cast alloys is the sliding surface in between. It offers targeted resistance to the particularly high abrasiveness of the cast alloys. A multi-layer TICN coating works as a coating, which has proven particularly useful in the case of abrasive wear.
The "Spanlos NEO AL" thread former was specially developed for the machining of wrought aluminum alloys. The geometry with the asymmetrical shape of the press studs works in the forming direction due to a relatively steep stroke with very little torque. The stroke on the back is much flatter and therefore has a supportive effect. This combination brings an enormous increase in tool life. A DLC (diamond like carbon) coating reliably protects against cold press welds, which often occur in these materials.