CAD Software for R&D
Create creative freedom in product development with increasingly complex software with 3D CAD or 3D models
Image: Solidworks
Tools for product development from CAD to configurator
Here you can see the latest hardware and software tools for industrial Product development like CAD Hardware, CAD software and any CAE software for simulation and calculation as well as new tools for the Configuration – just everything that the developer needs.
Contents
Brand new for your product development
The good old drawing board or the slide rule as well as formularies and scribblers are museum pieces. Today, all development work is done on a PC, also known as a workstation. There's artificial intelligence and virtual reality. CAE tools are used to calculate, design, configure, optimize and simulate. Yes the product developer today it is easy or not? After all, he has to Methods and Processes for product development as well as the software tools available on the market, so that the product development process is as efficient and reliable as possible and the ever-pressing market launch is a successful one. Not only must he operate the software, he also has to be able to update it continuously, learn the test methods and keep his hardware up to date.
Product development for special industries
The following new products are for special industries like the Automotive industry, Renewable energies, Technical Building Services, Medical Technology, Mobile Machinery has been developed. You will also find new drive technology from the applied research.
-
The demand for new sustainable plastics that are also recyclable is increasing. This also applies to thermoplastics, which are often used in the automotive industry. In addition to a material modeling technology that reduces the carbon content in plastic by 60%, you will find other thermoplastic innovations here that save weight, among other things...
-
Interstellar Lab introduces the Biopod self-sustaining food production system, which enables sustainable human life on Mars, Earth and the Moon by creating and reusing food, water and air. A virtual twin is used to simulate, test and compare the performance of the microhabitat and the biological systems...
-
Freudenberg Sealing Technologies (FST) has developed a material testing method and a simulation method for elastomer materials that can be used to improve the performance and service life of components in offshore wind turbines. The material simulation analyzes how the materials behave over the lifetime of a turbine.
-
The development time for self-driving cars should be reduced to hours instead of weeks. To achieve this, Continental and Nvidia are building a high-performance computer cluster based on the DGX AI system. Virtual data generation, artificial intelligence and the simulation of autonomous vehicles are the future core tasks of the most powerful supercomputer in the automotive industry.
-
Altair announces the expansion of the Altair Partner Alliance (APA) with the highly developed visualization and real-time multibody simulation software "Vortex Studio Create" from CM Labs Simulations. The software is now available for use by Altair HyperWorks customers who can gain real-time insights for all device types with the virtual training environment.
Product development for mechanical engineering
Below you will find hardware and software for product development in general and for the Industrial machinery and equipment:
First steel engine from the 3D metal printer
PTC has the world's first Micro turbo engine (Picture above) presented, which completely with the 3D printer was made. The only assembly was developed in the CAD software Creo. It contains all rotating and fixed components. The engine was printed with an EOS 3D printer from the material Inconel, a nickel-based, heat-resistant nickel-chromium alloy. It weighs only 3,6 kg.
3Dexperience Lab opened for startups
Dassault Systèmes has opened the first 3Dexperience Lab in Germany after Paris, Boston and Pune. The global Impact Lab aims to accelerate pioneering projects with a strong positive impact on society. The new hub in Munich supports young founders and local start-ups in implementing their disruptive ideas into reality. Innovators and doers should be able to fully develop their creativity.
Find the right plain bearing material with the Iglidur configurator
When it comes to wear-resistant tribo-polymers, users have Igus the agony of choice. For small series or series production in injection molding, a prototype from the 3D printer or semi-finished products, the plastics specialist has now developed an offline configurator for its 39 Iglidur standard materials: The user can determine the appropriate material using templates. An Iglidur expert system is also available for the selection and calculation of the service life.
- Details
- Hits: 5814
The Heinrich Kipp factory now enables its customers to configure their control units individually. Specific values are simply entered online, followed by production with the 3D printer. As a result, customers receive precisely tailored components - uncomplicated and on demand.
- Details
- Hits: 9453
Distrelec Schuricht is expanding its range on the Internet: From now on, individually designed circuit boards can be configured and ordered quickly and easily in the online shop. A professional assembly service rounds off the offer. The new service is made possible by a cooperation with the engineering office Friedrich (IBF), developer of the professional CAD software "Target 3001" and Beta Layout, the inventor of the "PCB pool" principle.
- Details
- Hits: 4649
PTC's Creo Flow Analysis Extension is a Computational Fluid Dynamics (CFD) solution that allows designers, engineers, and analysts to directly simulate fluid flow problems in Creo. The seamless workflow between CAD and CFD enables users to integrate the analysis early and often to understand product function and performance. The software was specially developed for the designer.
- Details
- Hits: 6127
To meet the growing demand for Crown gear Has to face calculation GWJ a Calculation module for bevel gears, consisting of face gears paired with cylindrical Spur gears in program. This module for angular gears is an extension option for the standard calculation solutions e-Assistant and TBK 2014.
- Details
- Hits: 6072
Elmeko has a large number of different LED control cabinet, LED compact and LED machine lights in its range. With the new lights Finder the company offers practical help in choosing the right luminaire. Criteria include input voltage, luminaire type, fastening, protection class and type of protection, luminaire length, connections and equipment with socket or the desired certification.
- Details
- Hits: 9903
The first free iPhone app from Kisssoft for hardness conversion is now available. With this iPhone application, the conversion of hardness values according to the hardness test methods according to Vickers, Brinell and Rockwell can now easily be carried out on the go. For this purpose, only one value has to be entered - the remaining hardness values are calculated immediately. The user can also compare different hardness scales with one another. Information on the individual test procedures round off this handy and effective iPhone app.
- Details
- Hits: 12057
Video statement by
Antonio Pascucci,
Vice President Products, 3Dconnexion GmbH, Munich,
explains the new driver platform at the Hannover Messe 3DxWare 10 for the 3D mouse, which is now available in the beta version after four years of development.
The statement was recorded at the Hannover Messe.
- Details
- Hits: 5765
3Dconnexion presents the Space Mouse "Enterprise": The 3D mouse was specially developed for professional users who work on complex CAD models for a long time. With numerous newly developed functions, it is more efficient and economical than its predecessor, the “Space Pilot Pro”. The most frequently requested features have been implemented in the new mouse.
- Details
- Hits: 3554
MSC Software announces the release of the new version MSC Nastran 2019.0. MSC Nastran is the most frequently used finite element (FE) solver worldwide for structural analyzes in the areas of statics, dynamics and acoustics. Version 2019.0 offers new element types and more user-friendliness when modeling loads and contacts.
- Details
- Hits: 5384
Aucotec standardized with his new 3D portal the link between 2D and 3D Engineering in mechanical and plant engineering. The software developer interface allows web-based or client-independent data exchange at any time. He can choose between all common 3D applications and the cooperation platform Engineering base (EB).
- Details
- Hits: 8056
A App from Minitec design engineers, equipment builders and production planners can easily use their smartphones to do the load-dependent Calculate deflection. The app calculates the deflection based on the aluminum profiles and linear axes from the modular system of the system provider. This enables you to quickly determine whether the profiles and axes of the static and punctiform loading are correctly dimensioned in a specific case - or not.
- Details
- Hits: 65516
In response to various requests from the industry, the Splined shaft connections to DIN 5481 and DIN 5482 implemented in Kisssoft by Kisssoft. The different Connections from these standards can be called up directly as files (MPK module). The user can now enter the "effective and actual tolerances" here as well.
