Ethernet media converter for indoor and outdoor use
- Details
- Hits: 9168
The Ethernet media converter the e-light series from EKS angel are suitable for almost all industrial applications indoors and outdoors. Compact and robust, they are also used in the extended temperature range and offer adapted input voltage ranges. All fiber types are supported, including POF, multimode and singlemode with fiber-saving bidi technology as well as HCS (PCF). Below we present the New developments before:
Contents
- Integrate media converter in Eplan
- Media converter for fast Ethernet
- Gigabit media converter for networked machines
- FAQ
Integrate media converter in Eplan
23.02.2021/20/XNUMX | More than XNUMX Ethernet media converters and Ethernet switches from EKS Engel are now in the Eplan Data Portal been listed. So e.g. For example, an Ethernet switch can be seamlessly integrated into an Eplan project. i.a. Machines and plant manufacturers are thus one step closer to virtual development and construction.
Media converter for fast Ethernet
12.10.2021 | EKS Engel presents the new media converter e-light-1000-XSG SFP and e-light-100-XS SFP. The compact media converters support Gigabit Ethernet or Fast Ethernet with or without PoE function. In addition, the products each have an electrical RJ45 and an SFP port. It can be flexibly equipped with transceivers for single and multimode fibers. A LAN distance of up to 20 km can thus be achieved. On request there are even converters for even longer distances.
The data packets are transmitted bit by bit. This means that, regardless of its length, there is a <500ns latency guaranteed. The media converter offer is also suitable for real-time protocols such as Sercos or Varan. The Ethernet items are particularly suitable for connecting remote WLAN devices to a local network such as HMI's, Controllers, IP cameras or Drives. To them also directly over the ethernet Cables To be supplied with voltage, the PoE converters have an output of up to 90 W in accordance with IEEE 802.3bt.
Open source mesh network for today's smart city
The media converters are for one Power supply designed from 12 to 32 VDC. A supply voltage of 54 VDC is required for the PoE versions. Different PoE classes can be operated via Dual Signature. The RJ45 Plug supports auto-negotiation / auto MDI / MDI-X. The optical interface can also be equipped with bidi transceivers, with which data can be transmitted in two directions over just one fiber.
The media converters are from one on the top hat rail mountable housing made of stainless steel with a size of only 25 x 62 x 62 mm. The status of the power supply, PoE support and data connection is indicated by LEDs on the front. This information can also be evaluated in monitoring systems via a signal contact. The media converters have an IP30 degree of protection. They can withstand temperatures from -40 ° to +75 ° C and are largely insensitive to electromagnetic interference.
Gigabit media converter for networked machines
29.09.2017/XNUMX/XNUMX | EKS Engel presents the new Ethernet media converter e-light 1000XS-G and e-light 1000XS-GP, which were specially developed for industrial applications such as the networking of machines or the connection of IP cameras. They each have an electrical and an optical port that support data rates of up to 1000 Mbit/s.
The Cut-through mode Thanks to its extremely short latency times, it enables delay-free Communication without intermediate storage. With the e-light 1000XS-GP, end devices can also be supplied via PoE / PoE + with a power of 30 W or a current of up to 600 mA.
The media converters are mounted on top hat rails and have a housing powder-coated stainless steel. Since the device measures only 85 x 63 x 26 mm, they are also suitable for installation in tight installation spaces such as those found in small distributor housings. A high degree of insensitivity to electromagnetic interference and a temperature range of -40° to +70°C ensure reliable operation.
RFID technology for factory automation and Warehouse-Logistics
The media converters are available for Singlemode and multimode Fibers. These allow a range of up to 30 km and are connected via SC connectors. The electrical RJ45 port supports auto-negotiation and auto MDI / MDI-X. The status of the 54-VDC power supply, PoE support and the data connection is indicated by LEDs on the front. ask
FAQ
What does a media converter do?
A media converter is a network device that supports Ethernet or other communications protocols from a cable type such as B. Kuper/CATx can be transparently converted to another cable medium such as fiber optic. Media converters are often used in pairs to integrate a fiber optic segment into copper networks to increase cabling distance and improve resistance to electromagnetic interference. They can also expand a LAN, adjust connection speeds and fiber mode conversion. By using a media converter, the benefits of a fiber optic cable can be achieved while still using existing copper cabling. With a media converter, companies can expand their network capabilities while saving costs by leveraging existing infrastructure.
Is a media converter a modem?
No, a media converter is not the same as a modem. A media converter is a network device that converts different types of media or data transmission formats, for example from fiber optic to copper cable. A modem, on the other hand, converts digital data into an analog signal and vice versa to enable data transmission over telephone lines or similar communication channels. While media converters are primarily used in networks to connect different types of cables, a modem connects network devices to the Internet or another network via analog lines.
What is a fiber optic converter?
A fiber optic converter or fiber optic media converter is a device that converts electrical signals into optical signals and vice versa. It allows network devices to be connected via fiber optic cables to those designed for copper cable connections.
What do the terms 1000Base t, 1000Base lx or 10Gbase t mean?
- 1000Base-T is an Ethernet standard that enables data transfers at speeds of up to 1 Gbit/s over copper twisted pair cables such as Cat 5e or Cat 6 over distances of up to 100 m.
- 1000Base LX is an Ethernet standard for data transmission at speeds of up to 1 Gbit/s over fiber optic cables, suitable for longer distances than 1000Base-T, typically up to 5 km.
- 10GBase T is an Ethernet standard that enables data transfers at speeds of up to 10 Gbit/s over copper twisted pair cables, with a range of up to 100 m.
You might also be interested in...
