Hebotec has one for extra large connectors Connector holder Developed for secure attachment. The plug holder Big, based on the Hebofix system, provides a firm, secure hold and comes as a two-part set with an integrated Alignment aid delivered. The parts are to be fastened to a mounting plate or support with an M6 cheese head screw.
The connector is free of play between the two stop plates and is included velcro tape fixed. The connector holder has contact surfaces for M17 and M23 connectors, which can each be lashed with Velcro.
To place the two opposite parts so that they are exactly aligned, the developers have one Alignment aid attached to the connector holder: The two connector holder parts can be precisely aligned with one another by means of two additional holes on the mounting surface.
Wago Gelbox protects connection terminals from moisture
There is a pin with a 3 mm diameter on the underside of each. This sinks into the hole, which prevents the holder from twisting. If the hole is not used, the pin disappears under pressure in the underside of the connector holder so that it lies flat.
The attachment of motor or encodercables in machines and systems, especially before drag chains that are constantly in motion, presents challenges: If a cable is defective, plugged connections are advantageous because only the section that is actually affected by the defect has to be relocated.
Industrial connector innovations from Harting
Are lines between machine and switch cabinet connected via a plug and can also be separated, it is easier to move a machine within a production line. The prerequisite for using plugs instead of continuous cables is a reliable attachment that effectively prevents plugs from accidentally loosening. This is ensured with the construction of the Big plug holder.