Here you will find everything that the designer needs for his design and the development engineer for his new development, from the draft to quality assurance in production, such as new products, their applications, new technologies or research results. Company reports as well as topics on technological and megatrends in all industrial sectors complete our range of industry news. Let's start with the news.
Igus is presenting the new business figures and presenting 2024 new products at the Hannover Messe 247 and would like to advance the goal of “Zero Lubrication” with the Igus Go app.
IFM Electronic was able to increase sales again in the 2023 financial year. The preliminary consolidated financial statements show a new sales record with sales of over 1,4 billion euros and growth of 3%.
Jumo has designed further training courses with a view to the currently exciting topics being discussed in individual sectors and offers corresponding seminars as part of the Jumo Campus.
Schaeffler AG's sales increased by 2023% to EUR 5,8 billion in 16,3. Currency-adjusted sales growth was 5,8 percent, which is within the forecast for the 2023 financial year.
The Motion Technology Company Schaeffler will expand production in the USA with a new automotive production site. The new facility will be located in Dover, Ohio.
AREAS OF EXPERTISE
Drive Technology
Automation
Electrical Engineering
Fluid Technology
Machine Elements
Measurement Technology
Product development
Connection Technology
Materials + Techniques
Industry news for your design and development from the specialist areas
As a networked industrial ecosystem, the exhibitors demonstrate how climate neutrality can be achieved through the use of electrification, digitalization and automation under the guiding theme of Energizing a sustainable Industry.
Control 2024, the important international trade fair for quality assurance, will take place from April 23rd to 26th in Stuttgart. The trade fair places a particular focus on automation and digitalization.
The SPS – Smart Production Solutions from November 14th to 16.11th. 2023 will see significant growth in the trade fair compared to the previous year and is on the way to pre-Corona levels.
Semiconductor test contactors with user-friendly mounting
Details
Hits: 6798
The new generation "Y-RED" is a completely revised further development of the semiconductor test contactors. It expands the Yamaichi Electronics product portfolio. It combines high-quality technology, standardized elements and simple and user-friendly assembly.
As the first product of the new generation Y-RED, the standard socket will be available for component qualification applications such as HAST, HTOL or Burn-in. The grid already starts at 0,30 mm. The application temperature range is specified from -40 ° to 150 ° C. The Y-RED sockets are designed for the LGA, QFN and BGA packages as well as (WL) CSP packages.
A fundamental development step is the new mounting technology of the base, which has been newly roofed and simplified for the user. In conventional sockets, the handling of printed circuit board, socket with screw, washer and nut is sometimes somewhat expensive. The new generation Y-RED introduces a so-called mounting plate with pre-assembled screws. If the mounting holes in the circuit board are drilled with sufficient accuracy, this plate will hold by itself or can be pressed lightly by hand. Then the base is simply screwed from above with sleeve nuts. The mounting plate is used as transport protection on delivery and can optionally be used as a stiffener.
Other features include the spring-loaded pressure piece in the cover to compensate for component height tolerances and the exact component guide in the base. Yamaichi Electronics is planning additional products within the new generation Y-RED for fault analysis, low inductance, RF / COAX and Kelvin applications.