The new KNX equipped with constant light control Presence detector by Merten by Schneider Electric promise a needs-based Individual room control. The KNX can be installed for corridors in entrance halls, long corridors such as hotels, toilets and other common areas. It was developed for long corridors with a large detection area.
IP54 certification the presence detector corridor can be installed indoors in places where it must be protected from water. This also applies to the KNX presence detector for halls, specially developed for Buildings with up to 14 m ceiling height such as warehouses, libraries and gyms.
The range is rounded off by the KNX presence detector Mini. The almost invisible mini sensor (43 x 71 mm) can be installed in suspended ceilings without changing the interior design or the architecture of a building, which makes it ideal for museums, hotels and retail stores, for example.
Remote control for configuration and testing
Without mounting frame or Tools and thanks Plug and play installation he is ready to go immediately. With the optional remote control, all KNX presence detectors can be configured and tested remotely. They detect even the smallest movements in every area of a building and thus enable, for example, lighting control that takes external conditions into account.
If there is sufficient daylight, the interior lighting can also be dimmed or switched off. The integrated Temperature- and ventilation control also ensures a more efficient use of Heating and air conditioning and thus lower CO2 emissions for improved air quality.