Fasteners
CONNECTING ELEMENTS

positive and non-positive joining

Screws and nuts, rivets, springs, threaded rods, washers, wedges, clamps, tolerance sleeves and other standard parts according to DIN, ISO and customer-specific

Image: Heinrich Kipp plant

Fasteners: News from screws, rivets, bolts

For the positive and non-positive Connection Technology in mechanical and plant engineering, users need Fasteners such as screws and nuts, rivets, springs, threaded rods, washers, wedges, clamps, tolerance sleeves and others standard parts according to DIN, ISO and customer-specific, for example made of steel, stainless steel or plastic. We report on the elements with which you hold your construction together economically. 

Brand new mechanical fasteners

Find out about news from the fasteners for fform-fitting and positive connection!

Dr. Tretter, Heinrich Kipp Werk, Misumi and others

After successfully setting up his e-shop, he is building Connection Technology Expert MBO Osswald its online product range. There is also one Eyebolt according to DIN 444 form B. Spring clip similar to DIN 11024 and a Axial joint with sealing cap. This gives users additional design options.

MBO eye bolt

 

Components can be quickly fixed and connected with the ball lock pins from Heinrich Kipp Werk. Two new designs with head locking now enable connections over large distances, while the steplessly adjustable ball lock pins are designed for varying component thicknesses. 

Tilt ball lock pins

mboAngle joints according to DIN 71802 serve as connecting and guide elements for moving parts and create corner connections. These standard parts are not always sufficient for the construction, especially when the power transmission is to take place linearly. Specially designed for this application, the axial joint from MBO Oßwald represents a special solution in the field of angle joints according to DIN 71802.

boellhoff1019Böllhoff presents the next development stage of its "Helicoil" thread technology. The “Helicoil Smart” combines the functions of “Helicoil Plus” and “Helicoil Tangfree”. The thread is colored blue and provided with a pin that does not have to be broken. The installation spindle bends it back when it is spindled and then compresses it. There is no need for tang breakage or removal. This thread insert made of rhombic profiled wire is also formed into a springy helix and, as a free-running variant, has a turn by turn freely running standard thread. 

Designers can now at Misumi Dowel pins and straight pins configure according to more than 30 different DIN and ISO standards. In the online shop, in addition to various types of cylindrical pins and dowel pins, slotted pins, spiral shaped pins, taper pins and grooved pins are also available. In addition to standard parts from our own production and from Reyher and Ganter, the portfolio also includes precisely configurable ones Make-to-order (MTO) components.

Misumi parallel pins dowel pins