CAD

CAD Software for R&D

Create creative freedom in product development with increasingly complex software with 3D CAD or 3D models

Image: Solidworks

CAE

CAE Software for R&D

Simulation, analysis, optimization or validation, DMU, ​​FEM, CFD, MKS, CAQ and CAM as well as fluid or flow simulation

Image: Dualis

Hardware

Hardware for R&D

Workstation, desktop, monitor or screen and 3D mouse - in short: tools for the designer and development engineer

Image: Hama

Configurators

Configurators for R&D

With new software, tools and apps, the configuration of components and systems in product development becomes child's play

Image: IMI Precision

Tools for product development from CAD to configurator

Here you can see the latest hardware and software tools for industrial Product development like CAD HardwareCAD software and any CAE software for simulation and calculation as well as new tools for the Configuration – just everything that the developer needs.

Kisssoft product development


Contents

Brand new for your product development

The good old drawing board or the slide rule as well as formularies and scribblers are museum pieces. Today, all development work is done on a PC, also known as a workstation. There's artificial intelligence and virtual reality. CAE tools are used to calculate, design, configure, optimize and simulate. Yes the product developer today it is easy or not? After all, he has to Methods and Processes for product development as well as the software tools available on the market, so that the product development process is as efficient and reliable as possible and the ever-pressing market launch is a successful one. Not only must he operate the software, he also has to be able to update it continuously, learn the test methods and keep his hardware up to date.

Product development for special industries

The following new products are for special industries like the Automotive industry, Renewable energies, Technical Building Services, Medical Technology, Mobile Machinery has been developed. You will also find new drive technology from the applied research

  • The demand for new sustainable plastics that are also recyclable is increasing. This also applies to thermoplastics, which are often used in the automotive industry. In addition to a material modeling technology that reduces the carbon content in plastic by 60%, you will find other thermoplastic innovations here that save weight, among other things...
  • Interstellar Lab introduces the Biopod self-sustaining food production system, which enables sustainable human life on Mars, Earth and the Moon by creating and reusing food, water and air. A virtual twin is used to simulate, test and compare the performance of the microhabitat and the biological systems...
  • Freudenberg Sealing Technologies (FST) has developed a material testing method and a simulation method for elastomer materials that can be used to improve the performance and service life of components in offshore wind turbines. The material simulation analyzes how the materials behave over the lifetime of a turbine.  
  • The development time for self-driving cars should be reduced to hours instead of weeks. To achieve this, Continental and Nvidia are building a high-performance computer cluster based on the DGX AI system. Virtual data generation, artificial intelligence and the simulation of autonomous vehicles are the future core tasks of the most powerful supercomputer in the automotive industry.  
  • Neomento develops virtual reality-based software solutions for the treatment of mental disorders such as anxiety and addiction. The most effective form of treatment, confrontation in real settings (in vivo), is logistically expensive, challenging and not fully controllable.
  • Altair announces the expansion of the Altair Partner Alliance (APA) with the highly developed visualization and real-time multibody simulation software "Vortex Studio Create" from CM Labs Simulations. The software is now available for use by Altair HyperWorks customers who can gain real-time insights for all device types with the virtual training environment.

Product development for mechanical engineering

Below you will find hardware and software for product development in general and for the Industrial machinery and equipment:


First steel engine from the 3D metal printer

PTC 3D printingPTC has the world's first Micro turbo engine (Picture above) presented, which completely with the 3D printer was made. The only assembly was developed in the CAD software Creo. It contains all rotating and fixed components. The engine was printed with an EOS 3D printer from the material Inconel, a nickel-based, heat-resistant nickel-chromium alloy. It weighs only 3,6 kg.


3Dexperience Lab opened for startups

DassaultLabDassault Systèmes has opened the first 3Dexperience Lab in Germany after Paris, Boston and Pune. The global Impact Lab aims to accelerate pioneering projects with a strong positive impact on society. The new hub in Munich supports young founders and local start-ups in implementing their disruptive ideas into reality. Innovators and doers should be able to fully develop their creativity.


Find the right plain bearing material with the Iglidur configurator

Igus IglidurWhen it comes to wear-resistant tribo-polymers, users have Igus the agony of choice. For small series or series production in injection molding, a prototype from the 3D printer or semi-finished products, the plastics specialist has now developed an offline configurator for its 39 Iglidur standard materials: The user can determine the appropriate material using templates. An Iglidur expert system is also available for the selection and calculation of the service life.


 

Tebis presents with its release 4.1 a consistently parametric-associative CADCAM Complete system. The completely newly developed system base is specially designed for single part and small series production. Frequent component changes, tight delivery dates, the high number of variants and different data qualities determine everyday life here.

Tebis CADCAM

 

3Dconnexion03173Dconnexion extends its product range with the "Cadmouse Wireless". The high-performance device is the first wireless mouse that was developed for the mobile workplace. A high-precision optical sensor, a battery life of up to two months, triple connectivity and CAD-specific features such as the dedicated middle mouse button support engineers and designers in their daily work.

GWJ Technology provides a new and enhanced version of its software Transmissioncalculation for complete gear transmission in front. The new version of the system manager as an extension of the standard solution Eassistant and TBK now also calculates shaft geometries of gears with the support of background graphics.

GWJ gear transmission

 

Igus0419Fast and easy configuration of complete cable guides: The E-Chain Expert from Igus. With the newly developed online tool, the user can design his individual ready-to-connect energy chain system in just a few steps. The internal division is carried out automatically and the user receives reliable information on the durability of the chain and the cables used.

An world first announces the start-up Drag & bot with the free Robot simulation for the significantly easier planning of Automation in factories. CAD models of cell and robot gripper are used to estimate the feasibility, cycle time and accessibility of the application in a few minutes by means of simulation.

Dragandbot robot simulation

 

kisssoft0318A new graphic in the current Kisssoft release shows the stresses in the material below the contact surface Rollingrings and rolling bodies. The course of the voltages and their maximum values ​​are shown. This information is of particular interest for large diameter bearings, where the bearing rings are usually case-hardened and the case depth should be determined based on the loads.

kisssoft0317When dimensioning shafts, there is the option of specifying the shaft dimensions in terms of strength and Rolling with regard to the bearing service life by the Kisssoft software. This significantly speeds up the design of a gearbox.

Igus would now like to make the B2B business "Amazon-like": Without in-depth technical know-how and CAD software, users can now get the right one Screw and the accompanying drawing. With the new spindle configurator everyone can choose from the world's largest Thread shop design individually manufactured and durable threaded spindles.

Igus threaded spindle online

 

The new CAE software Odyssey A-Eye from Hexagon (MSC Software) gives users without expert knowledge access to powerful digital twins Artificial intelligence (AI) applications. These require less input data and use image recognition to predict behavior. Odyssey is based on machine learning and performs parametric design and optimization in real time.

MSC software CAE simulation

 

The VDMA estimates the damage to German companies Product piracy arises, to around 6,4 billion euros annually. Also Schaeffler is regularly affected by the counterfeiting and takes consistent action against counterfeit products. How and which means are still available, e.g. B. the WBA app, find out here:

Schaeffler product piracy

 

Mechanical engineering companies and suppliers require consistent strategies and processes when digitizing CAD data in the product configuration. Because customer wishes and their requirements for products are becoming more and more individual, this makes their standardization and modularization necessary at the same time. Cideon Conify has the right solution for this.

Cideon order processing CAD

 

Sales needs Marketingbecause marketing aligns the company with the market. And marketing needs sales because sales tests concepts and strategies. The Digital sales guide von Urban Division unites the two corporate divisions and lets them pull together. With this smarketing, a company's sales can be increased.

Sales Marketing Digital sales guide