Industrie Aktuell
News portal for construction and development
joedden0416AB represents the Jödden Inclinometers reach the KAS200 series before, the resolutions of 0,0001 °, repeatability to 0,01 ° and long-term stability in the same order. The hysteresis, which results in rapid temperature changes (eg. B. 0,02 °), formed in a short time back to 0.

The measuring elements are based on the capacitive measuring principle and are characterized by high accuracy and impact resistance. This is achieved, among other things, by the three-layer "bulk" micromechanical technology with high-purity silicon. Due to the special construction, no drift due to deformation of the test compound is to be expected, even after hard impacts. The gas damping within the sensor element prevents resonance frequencies and overshoot.

The sensor is built into the rugged IP67 / 68 waterproof housing. The 4 ... 20 mA 3 wire signal output also allows longer connection lines. By default, KAS200 inclination and acceleration sensors are available for 1 and 2 axes with ranges from ± 1,5 ° to ± 90 °.

The measuring elements are designed as a double capacitor, extremely low noise and output a large useful signal. Most of the noise is caused by the evaluation electronics.
Another contribution of the manufacturer This e-mail address is being protected from spambots To display JavaScript must be turned on!
Rollon
Gimatic
Auvesy
Turck
Igus
Schmersal
Harting
Kocomotion-phone-all
NORD
Pepperl + Fuchs
Mitsubishi
Mayr