Industrie Aktuell
News portal for construction and development

eks1113SPS IPC Drives Hall 9, 401 Stand

The new "Essential Line" from EKS angel includes five industry-standard Basic switches supporting Fast Ethernet. Since these switches are only 3 cm wide, they require little space. The interfaces are available either for single, multimode and HCS fibers or for POF. This allows distances of up to 30 km to be bridged.

For extremely flat installation spaces, the DIN rail clip can be mounted on the side of the devices. A bezel is available for installation in 19 '' racks. In addition to a switch with eight twisted pair ports (10 / 100 BASE-TX), there are four versions with additional optical interfaces (100 BASE-FX) available in the combinations 8 TX / 2 FX, 4 TX / 2 FX, 4 TX / 1 FX and 4 TX / 3 FX are available. All switches are EMC-proof and can be used in a temperature range from -40 ° to + 70 ° C. The sturdy stainless steel case measures 155 x 30 x 100 mm. There are threads for the DIN rail clip at the rear and on the right side and for the 19 '' front panel at the front.

The optical versions support the Bidi technology, with which the data can be transmitted via SC connector in just one fiber in both directions. Furthermore, versions with ST and E-2000 connection technology are also available. The twisted pair ports have sockets for RJ45 connectors. The redundant power supply is designed for 12 to 70 VDC. Its status, as well as the status of the network connection, are indicated by LEDs on the front panel.

Another contribution of the manufacturer This e-mail address is being protected from spambots To display JavaScript must be turned on!