Industrie Aktuell
News portal for construction and development

rauscher21019The Basler "Blaze "3D camera with GigE interface and VGA resolution (Sales Rauscher) is suitable for determining the position, position and volume of objects as well as for detecting obstacles thanks to the Sony Depthsense ToF technology. The 3D industrial camera works on the basis of the time-of-flight principle.

Equipped with the latest laser diode technology (VCSEL), the camera works in the near-infrared spectrum, ie in the wavelength range around 940 nm and is therefore uncompromisingly suitable for use in daylight conditions. With a multipart image consisting of the distance, intensity and confidence maps and a frame rate of 30 fps, it generates 3D point clouds and 2D gray images in real-time within the camera, thereby relieving the load on the host system's processor.

The measuring principle of the ToF camera is based on the time required for the light from the light source to the object and back to the camera. The farther the distance, the longer the time required. The light source and the image capture are synchronized so that the distances can be calculated from the image data.

Clearly more precise scanning of the reflected light

The integrated Sony Depthsense IMX556PLR-C sensor with CAPD (Current Assisted Photonic Demodulator) pixel structure in conjunction with the back-illuminated CMOS sensor architecture enables a much more precise and sensitive scanning of the reflected light. Thus, the Blaze 3D camera allows, regardless of light and contrast and with a resolution of 640 pixels x 480 pixels, approximately millimeter-accurate, optical measurement over a measuring range of up to 10 m, in the z. B. two europallets or a small car fit.

With its integrated lens and invisible infrared illumination, the Basler Blaze is a compact, IP67-protected unit with no moving components. B. suitable for mounting on robot arms. The camera is particularly easy to integrate and can be operated by an intelligent method without mutual interference in multi-camera systems.

Typical applications include industrial automation, robotics, logistics, medical, and many areas of the smart factory, as well as cargo sizing, palletizing, object counting, and autonomous vehicle applications.

Another contribution of the manufacturer This e-mail address is being protected from spambots To display JavaScript must be turned on!

More news from image processing

  • Control machine vision and the solutions of industrial image processing penetrate ever further into industrial areas, where the best image quality, highest resolution and high speeds are required. SVS-Vistek is introducing the new GigE Vision industrial camera SHR461CX from the high-resolution SHR series. With over 100 megapixels, the GigE camera offers an enormous dynamic range of 82 dB. The new rolling shutter sensor IMX461 from Sony also has a resolution of 14.192 x 10.640 pixels and therefore an outstanding image quality.
  • Basler (Sales Rauscher) is expanding its embedded vision offering with two camera modules that are matched to NXP's i.MX 8 processors. With the combination of Basler's camera know-how and the powerful processors from NXP, ideal embedded vision solutions can be implemented for industrial applications.
  • Qioptiq is expanding its quartz lenses "Linos F-Theta Ronar" with a new telecentric version for the green spectrum (515 - 540 nm). The Excelitas subsidiary developed this laser lens especially for micro material processing. Other fields of application are laser structuring as well as laser welding and cutting.
  • With the “Rapixo CXP”, Matrox Imaging (Sales Rauscher) has developed a new frame grabber generation for version 2.0 of the Coaxpress (CXP) interface standard. With it - also downward compatible to Coaxpress 1.0 / 1.1 - data rates of up to 6,25 Gbit / s (CXP-6) or up to 12,5 Gbit / s (CXP-12) can be achieved.
  • SPS Hall 4A, Booth 126 When measuring temperatures in processes using lasers, the infrared camera must be insensitive to the stray light from the laser. The new "PI 08M" from Optris is ideally suited for such applications because it has a very narrow-band spectral sensitivity at 800 nm.
  • With the Basler Boost, Basler (Sales Rauscher) is expanding its portfolio with cameras with the Coaxpress 2.0 standard and modern CMOS sensor technology. The "Boost Bundle" consists of a Boost camera, the matching CXP-12 interface card and the CXP-12 accessory starter kit for a time-saving and cost-saving evaluation phase.
  • The "NIT Widy Sens SWIR" cameras with dual-mode "InGaAs" sensors from Rauscher offer a compromise between high sensitivity due to linear response and high dynamics at 120 dB with logarithmic response. 230 frames / s and synchronous image acquisition in the ns range are further features of the camera.
  • The Basler "Blaze" 3D camera with GigE interface and VGA resolution (sales by Rauscher) is suitable for determining the position, position and volume of objects and for detecting obstacles thanks to Sony Depthsense ToF technology. The industrial 3D camera works on the basis of the time-of-flight principle.
  • The "Scenesan Pro" real-time stereo vision system from Nerian (sales Rauscher) can now also evaluate input images with a resolution of up to 6 megapixels. The dedicated image processing system calculates depth information from stereoscopic image data.
load More halt SHIFT to load everything load all