Hiwin has universal Servo D1-N specifically tailored to the requirements of machine builders in Europe. It is suitable for rotary servomotors as well as linear and torque motors and thus covers the entire spectrum of the drive manufacturer. It supports numerous digital and analog encoder interfaces, Hall sensors and higher-level protocols such as 1 2.2 Endat Vss and the D1-N is suitable for a wide range of applications and simplifies the integration especially in the linear motor area.
Even engines from other makes that have these encoder interfaces can be easily used with the servo amplifier. The D1-N allows fast, safe wiring and commissioning as well as easy replacement in case of service. A USB interface and the "Lightening" PC operating software enable uncomplicated, convenient parameterization and rapid commissioning. A real-time oscilloscope, FFT analysis and Bode and Nyquist diagrams help operators with commissioning and error analysis. In addition to ± 10 V and pulse / direction setpoint interfaces, the D1-N also offers an EtherCAT interface, which supports the Coe protocol and can thus be integrated into any appropriately designed Ethercat master controller with CiA402 interface.
The STO safety function according to IEC 61800-5-2 is integrated directly into the device: In the event of a fault, the D1-N can be used to reliably switch off the motor current and thus the motor torque without interrupting the supply voltage at the drive. This eliminates the need for expensive hardware to switch off the supply voltage and ensures a fast restart.