The distributed frequency of series SK 200E NORD Drive Systems provide with practical features for easy and comfortable handling. Much comfort especially the compact status and diagnostic cockpit on the front page: At a glance, it shows functional states with LEDs and is right next to it for diagnostic purposes a serial interface with RJ12 port available.Simple operating devices such as the "SimpleBox" or the "ParamaterBox" from NORD can be connected by cable to this socket, but if required also a PC or laptop, if users prefer the control, operation, parameterization and diagnostics with the "Nordcon" software The LED display in the middle indicates the states of the digital inputs and outputs of the SK 200E.The LED on the right indicates the general operational readiness of the frequency inverter or an error.For inverter types with on-board AS-Interface, its status is also there There are two integrated potentiometers to the right of the diagnostic cockpit, which can be used to automatically set a setpoint value, for example, the setpoint speed and the associated ramp.
Even outside the cockpit, the devices are designed to be as intuitive as possible. Colored M12 connectors, for example, directly illustrate the supported industrial communication system (eg Profibus DP or CANopen). In order to be able to easily adopt set parameter sets from device to device of the same type, the inverters are also equipped with plug-in "EEPROM" blocks. An SK 200E can be mounted directly on the motor terminal box of a geared motor to create a combined, fully integrated drive unit for field use. A close-fitting wall mounting is possible. If required, types with features such as the "Posicon" integrated positioning control or the "Safe stop" safety function can be selected.