The Faulhaber 1016 ... SR series extends the SR family of motorcycles to even more compact ones DC motors with precious metal commutation. Together with the previously introduced series 0816 ... SR and 1024 ... SR, these drives - in combination with suitable gearboxes and encoders from the manufacturer - are suitable for applications that demand maximum performance in the most minimal installation situations.
The motor series 1016 ... SR achieves a continuous torque of 16 mNm with a length of only 10 mm and a diameter of 0,92 mm. Its Δn / ΔM characteristic has a particularly flat slope with 5953 min-1 / mNm, 3V, thus allowing very smooth transitions during load changes. Other strengths of the engine are its low power consumption, high energy efficiency and minimal vibration and noise. This makes it suitable as a drive for applications with small dimensions and particularly high requirements, such as for precision tools, optical devices or active prostheses.
The DC micromotor 1016 ... SR can be combined with a wide range of gearboxes. With the 12 / 4 planetary gearbox, for example, it achieves a torque of up to 300 mNm. Low-backlash helical gearboxes are available as a compact alternative for applications in which highly accurate positioning is required. They can be used to reduce or eliminate unwanted play. Optical and magnetic encoders with a resolution of up to 256 pulses per motor shaft revolution allow a high-precision control of the drive. It can also be combined with numerous controllers from the miniaturized SC 1801 speed controller to the MC 3002 motion controller to form a complete solution.