Logimat Hall 7, Stand A31
EBM-Papst presents intelligent drives for driverless transport systems as well as Shuttle Applications for the innovative Logistics, The drive specialist is hiring as a novelty Driving-wheel steering system before that about BLDCbrushless DC motors is operated for mobile battery operated applications. The DC motors are also used in shuttle applications.
The market for driverless transport systems (AGVs) is growing disproportionately. The drives for freely navigating AGVs must meet high requirements. Intelligent networking via bus systems and quick commissioning require users. To do this requires a high power density with minimal installation space and maximum efficiency.
BLDC motors for driving-steering system
The new driving-steering system from EBM-Papst is an innovative drive solution for mobile battery-operated applications. It enables the vehicle to move freely and consists of an engine, transmission, sensor and wheel.
EBM-Papst uses the brushless DC motors ECI-63 and ECI ‑ 80 as drives in the new drive-steering system or as direct wheel drives. The BLDC require little installation space. The brushless DC motors achieve a high torque with only 24 V. For a short time, the BLDC can deliver three times the performance. The integrated intelligence in the motors enables predictive maintenance and condition monitoring in the sense of Green Intelligence. Together with the Optimax gearboxes, robust, compact and intelligent drives are created.
BLDC motor for shuttle
Shuttle is currently in the trend of intralogistics. Today, warehouses are built upwards in order to keep the space consumption of a warehouse as low as possible. All storage positions on all levels are then approached by shuttle vehicles. The brushless motors ECI-63 and ECI-80 in combination with the Optimax gearboxes also meet the requirements regarding positioning accuracy, service life and dynamics.
More news about engines
Interpack automatic positioning systems save time when changing the format and increase the efficiency of production lines. The compact positioning drive Segmo GEL 6129 from Lenord + Bauer significantly reduces the changeover effort. Thanks to the various connection options in the form of straight and angled plugs and its small dimensions, the actuator offers more freedom in system design. Identical housing dimensions for the positioning drives for the 2,5 Nm and 5 Nm variants facilitate integration into the system. The maintenance-free Segmo compact drives with battery-free multiturn absolute encoder, gearbox and motor as well as integrated power and control electronics are designed for standalone use and for connection to the central control unit Segmo-Box. Positioning drives in the Segmo system The complete positioning drive system Segmo consists of three individual components that work together...
Hannover Messe Hall 5, Stand D17 Nord Drivesystems presents a new universal motor in 20 variants with outputs from 0,12 to 45 kW. The engine is certified according to CE, UL, CCC, CSA, ISI and EAC. It meets the corresponding minimum efficiency requirements. It is therefore suitable for the markets in Europe, the USA, Canada, Russia, China, India and elsewhere. The engine is also certified by Bureau Veritas for shipping and offshore applications.
Aerotech introduces the HEX150 RC, a new hexapod. With a diameter of 150 mm, this smaller brother complements the existing product family with a diameter of 500 and 300 mm. In addition to being used for quality assurance in measurement and testing technology, it is also particularly suitable for automotive, electronics, mechanical engineering and medical technology.
Hanover Fair Hall 9, Stand F06 The integrated series for AMI812x servo drives from Beckhoff combines the components servo motor, output stage and fieldbus connection. The new servo drives expand the compact drive technology up to 48 V DC by extremely compact and decentrally installable devices. This means that the servo motor, output stage and fieldbus connection are integrated in a space-saving design for applications with cabinet-free automation in the motion power range up to 400 W.
Achieve an efficiency of 97% without rare earth? This is possible with the alternative motor winding of three-phase asynchronous motors (DAM) and three-phase generators, which the company Umwelt-Technik-Marketing presented at the specialist press days 2020. These motors do not need permanent magnets. Such a winding reduces the use of materials, especially copper. The DAM constructed in this way achieve an efficiency of class IE 4 and dispense with rare earths for the production of permanent magnets in the windings of the motor.
Hannover Messe Hall 5, Stand A31 Cover story Koco Motion and Adlos have revised their ingenious unique platform "Kannmotion". The cooperation partners present the generation 2.0 drive consisting of a stepper motor with integrated control and encoder. Electronic and mechanical improvements were made and the software further developed. The operating tool for the stepper motors has also been completely revised. It now supports users even better in integrating the platform into their product development.
Minibea Mitsumi and Renesas Electronics have jointly developed a sensor-based stepper motor with resolver and stepper motor control. The resolver-based motor has been optimized for use in robots, office automation, medical technology and care. Such applications require motors with more precise motor control and miniaturized form factors. They also have to be robust against environmental influences.
When changing formats on production machines such as packaging machines, labelers, textile machines, printing machines or woodworking machines, precise and reproducible positioning is always important. In addition to optimizing the machine set-up times, incorrect settings can also be prevented by fully automated positioning drives. Siko now presents new positioning drives of the AG03 / 1 series with IO-Link interface.
Logimat Hall 7, Stand A31 EBM-Papst presents intelligent drives for driverless transport systems as well as shuttle applications for innovative logistics. As a novelty, the drive specialist is introducing a drive-steering system that is operated via BLDC brushless DC motors for mobile battery-operated applications. The DC motors are also used in shuttle applications.
load More halt SHIFT to load everything load all