Industrie Aktuell
News portal for construction and development
bahr0415SPS IPC Drives Hall 4, 471 Stand

Bahr module technology, the new Linear axis DSZS 120 P with a 120 mm wide profile before. Instead of masking tape, it has an apron that arched over the guide slots. The number verschleißbarer components such as masking tapes and slides is reduced thereby and by the friction attributable can use smaller engines.

The fender, fixed with a few screws, also increases service and maintenance friendliness. As with all axles of the DSZS basic series, the aluminum guide body integrates two rail guides on which the guide carriage mounted with four carriages is moved over a circulating toothed belt. By means of a drive block arranged centrally on the underside of the axle, into which the toothed belt is deflected, the system achieves extremely compact dimensions with regard to its overall length. The axes are available in customer-specific lengths up to 1600 mm with a repeat accuracy of ± 0,1 mm.
Another contribution of the manufacturer This e-mail address is being protected from spambots To display JavaScript must be turned on!