A payload of 12,5 kg with the 2,7 times gravity start to 14 m: It may be the LLZ 60 linear axis of Bahr Modultechnik the cutting of the plastic film. The module consists of an aluminum square profile with integrated roller guide. The carriage is moved by an internal circulating toothed belt. In this particular "missile axis" of the belt by two servo motors is driven at both ends.
The second drive follows the master drive as a torque support, keeps the belt constantly tensioned and thus prevents shearing even with accelerations of 125 m / s² and braking accelerations of -140 m / s². With the high-speed drive module, in the application with a cutting knife, a wide film web is cut diagonally during production, which saves considerable amounts of waste. The drive module has worked without problems on the trainer over 38.000 cycles. When testing the components, only minimal wear could be detected. The positioning system is completely pre-assembled and put into operation so that machine builders can easily integrate it into their applications.