Industrie Aktuell
News portal for construction and development

MISUMIAll Components of a trapezoidal screw drive from a single source - that's what designers find in the product catalog from Misumi Europe, The supplier of mechanical standard, purchase and drawing parts for automation technology and special machine construction has coordinated all components. A design or calculation of the individual components is not required. This allows the quick and easy construction of a complete spindle drive.

The designer need not worry about the correct design of the individual components or the calculation of the respective loads. In the new product catalog he finds threaded spindles in diameters from 8 to 50 mm and lengths up to 1200 mm with gradients from 1,5 to 8 mm. Diameters and lengths are individually configurable in steps of 1 mm. Optionally, left-hand or right-hand threads are available in 1.1191 or 1.4305 materials. Designed for the respective spindle diameter and spindle life, the bearing blocks for fixed and floating bearing housings are supplied with ball bearings. The spindle nuts are available for each spindle diameter in the materials PPS, polyacetal and brass. The customer can choose between different flange shapes, block and backlash-free design. The supplier offers corresponding support blocks made of steel (1.1191) or aluminum (EN-AW-5052) in various sizes and heights to match the spindle nuts with flange.

There is a wide range of digital position indicators for front or vertical mounting for uncomplicated positioning and distance determination via a threaded spindle. The easy-to-read digital display has either four or five digits with 0,1 mm reading accuracy. It is available in two sizes, two colors and with or without counter reset, and can be read from the front or top, depending on the model.

further contributions from manufacturer CAD data Order Catalog Webcast This e-mail address is being protected from spambots To display JavaScript must be turned on!

Pepperl + Fuchs