Industrie Aktuell
News portal for construction and development

mayrAn air monitoring in vertical axes as passenger elevators prevent overload conditions, such as driving against a brake. Mayr Antriebstechnik presented to Interlift release monitoring with a new contactless proximity indicator. Wear-free, insensitive to magnetic fields and absolutely reliable, the system can also be retrofitted into existing brakes.

The world leader in Safety brakes for safety-critical applications such as lifts As an alternative to the proven release monitoring with microswitches, vertical or vertical axes now also offer a non-contact system with proximity switch. Due to the lack of mechanical parts, its service life no longer depends on the switching frequency. The system is magnetic field resistant and works absolutely reliable and wear-free. It is also insensitive to shocks and shocks, as there are no moving elements and the electronics are completely shed.

Further advantages of the proximity switch are the high switching point repetition accuracy, the small hysteresis and the low temperature drift. The switching pin for the proximity switch is mounted in the factory and, in contrast to the release monitoring with microswitch, is not adjustable. Application errors by adjusting the switching point position are thereby excluded - an important contribution to the greatest possible functional and operational safety.

The non-contact release monitoring can optionally be designed as normally open or normally closed. With the normally closed function, the high signal appears when the brake is de-energized. The armature disc drops, the brake closes. A break in the initiator cable is detected when the brake is closed. With the normally open function, the high signal appears when the brake is energized and the armature disc releases the rotor. The brake is released. Only at high signal does the engine get the enable to start up. Driving the engine against the closed brake is thus reliably excluded. Cable break is detected when the brake is open.

The non-contact release monitoring can be integrated into various brake series from the manufacturer. All safety brakes that could previously be equipped with micro switch-based release monitoring can now also be equipped with the non-contact system with proximity switch.

Interlift hall 7, booth 7112


Interview Another contribution of the manufacturer Literature CAD data This e-mail address is being protected from spambots To display JavaScript must be turned on!

Mitsubishi
Igus
Gimatic
NORD
Mayr
Kocomotion-phone-all
Pepperl + Fuchs
Harting
Turck
Rollon
Schmersal
Auvesy