Industrie Aktuell
News portal for construction and development
montech0114Montech presents the Conveyor TB30 and TB40 that are user friendly due to their flexibility and more efficient by their efficiency-optimized drives than their predecessors. They have a higher power density and lower power consumption. With the same chassis width, they have a wider belt surface and thus a larger floor space. The belt is easy and fast to change.

The conveyor belts TB30 are available with head drive and center drive. Without belt change, they can be converted from head to center drive and vice versa. When converting from head to center drive only one pulley is required. With a conveying speed of up to 27 m / min, they can transport up to 100 kg in the conveying mode. Seven different widths from 45 to 250 mm with a maximum length of 10 m are available.

The conveyor belts TB40 are available in six different widths from 300 to 800 mm with a length between 1 and 6 m. Thanks to the motor integrated in the drive shaft, the conveyor belt is compact. The drive is provided by an 24 V motor, with which up to 80 kg can be transported in the conveying mode.

The diameter of the pulleys of 60 mm and the drive roller of 73 mm allows the use of sturdy straps. A digital / analog input selects Start / Stop, Direction of Rotation and Speeds. The over-temperature and ready signal is transmitted via a digital output.
Another contribution of the manufacturer
This e-mail address is being protected from spambots To display JavaScript must be turned on!

Mayr
NORD
Auvesy