Flo-ir presents a Send thickness gauge, which can be used to measure layer thicknesses on wood, paper or plastics. For example, if the material is coated very thinly or a lubricant coating is applied, the thickness of the individual layers of the coating can then be verified.
The measurement takes place Non-destructively and with micrometer precision. The system works independently of the carrier and requires no knowledge of the coating material when fully developed. Using non-destructive optical tomography, each layer in a layer composite is measured and characterized.
Layer thickness measurement ensures quality in powder coating
The optical tomography replaces the microtome or wedge cuts and allows completely non-destructive measurement of the paint layers on glass, plastic, wood, stone, concrete. It is the only process that can be used with all substrates, even if there are glitter particles or scattered particles embedded in the layer.
You might also be interested in...
Universally applicable intelligent CAQ system
Measure solar radiation and determine UV Eruthem radiation
Learn everything about infrared camera measurement technology at Optris
Large wind turbine successfully tested on a system test bench
CAQ Software | Intelligent measurement and testing technology
