kisssoft0318A new graphic in the current Kisssoft release shows the stresses in the material below the contact surface Rollingrings and rolling bodies. The course of the voltages and their maximum values ​​are shown. This information is of particular interest for large diameter bearings, where the bearing rings are usually case-hardened and the case depth should be determined based on the loads.

The elasticity of the bearing rings can now also be taken into account. External loads are defined on the outer or inner ring and the deformation of the bearing ring can be determined iteratively with the deflection of the rolling elements. Since this calculation is often performed for planetary gears, the load can be taken directly from the gear calculation be taken over.

For the design of rolling bearings, a variation calculation for the internal geometry of the bearings can also be performed. Design parameters such as number of rolling elements, rolling element diameter, but also bearing parameters such as osculation or density of Wälzköper when using cages can be varied. The results are displayed clearly in list form or graphically and can be filtered easily.