Industry up to date

Electronic components for electrical circuits

Griessbach has applied for a patent for its newly developed Hall switching concept. With the operating principle, Hall switches and pushbuttons of various designs can be reliably protected against interference from external magnetic fields.

schmersalSchmersal0918Motek Hall 7, 7103 Stand

Experience the Schmersal group shows how you can improve even traditional standard components: the new generation position switches The PS series offers users greater flexibility, easier handling and reduced storage costs.

stahl0618Achema 11.1 Hall, Booth C45

R. Stahl presents a new, extremely slim model series of his Separation system "Ispac" in front. It starts with switching amplifiers, transmitter power supplies and digital outputs to control solenoid valves. With only 12,5 mm width, the new single- and dual-channel modules save up to 30% space in the control cabinet.

waldmann0418The "Mach LED Plus" machine lights from Waldmann The addition of luminaire interfaces offers new features: The digital luminaire input for power-free switching saves additional relays and switches. This saves space and costs. And because, thanks to the interface, the light can only be switched on when it is actually needed, the energy consumption is also reduced.

ichaus0318The optical sensors of the "IC PNH "series From IC house a small sensor area of ​​only 1,9 x 3,3 mm is sufficient to scan encoders and generate sine wave signals in best hi-fi quality. The evaluation is done with interpolation ICs with a vernier calculation, such as IC-MN or IC-MNF, which can achieve very high angular resolutions above 21 bit - even for code disc diameters of only 26 mm.

tdk0218Embedded World 3A Hall, Booth 209

The new DC / DC converter series TDK Lambda "GQA" provides 120 W output power with the common output voltages of 5, 12, 15, 24, 28 and 48 V. The GQA120 modules are fully encapsulated and operate over a wide range input from 9 to 36 VDC (18-36 VDC in the 48 V model). Short-term voltage peaks up to 50 VDC at the inputs can not affect the modules.

This website is presented by: