Online magazine for design and development

Here you will find everything that the designer needs for his design and the development engineer for his new development, from the draft to quality assurance in production, such as new products, their applications, new technologies or research results. Company reports as well as topics on technological and megatrends in all industrial sectors complete our range of industry news. Let's start with the news.

Company News

Ebm-Papst wants to sell industrial drive technology to Siemens
The Ebm-Papst Group has announced that it will sell its Industrial Drive Technology (IDT) division to Siemens AG. Both sides have signed a corresponding agreement.
Jumo's new Sensilo plant construction is progressing
Jumo is building a factory in the technology park for the production of temperature and pressure sensors with a production area of ​​around 13 m². At around 000 million euros, the new building is the largest investment in the company's history.
3DExperience Word 2024 in Dallas
At 3DExperience World 2024 in February in Dallas, Texas, Dassault Systèmes celebrated the event's 25th anniversary. The annual user meeting supports the global community in the development of future-proof products and processes.
Michael Koch GmbH moves into a new workshop
There is now more space available in Michael Koch's “Factory” for the assembly of customer- and machine-specific safe braking resistors. The new, modern hall was recently “taken by storm” by the employees.
Elon Musk is suing OpenAI for profit-making
Elon Musk files a lawsuit against OpenAI and CEO Sam Altman, accusing them of breach of contract because the company, which was originally designed as a nonprofit, is now operating for profit.
AREAS OF EXPERTISE

Industry news for your design and development from the specialist areas

switch cabinet

switch cabinet

On to the intelligent drive train for predictive maintenance

The Roba-brake-checker module or the torque-measuring shaft coupling from Mayr ensure intelligent safety in smart production.

To the post

plastics

plastics

The first 100 Igus bikes hit the streets

The first 100 Igus Urban Bikes hit the streets and an in-house production facility with a capacity of 10.000 bicycles is set up in Cologne.

To the post

Couplings

Couplings

Torque measuring shaft coupling

The smart steel multi-plate coupling Roba-drive-checker from Mayr can do more than just transmit torque and compensate for shaft misalignment.

To the post

Robotic

Robotic

Programming robots for cable handling

As an exhibitor in the Application Park at the Hannover Messe, Artiminds Robotics is presenting a cable handling application for precise cable harness assembly.

To the post

INDUSTRY SPECIALS

Industry news for your design and development from the branches

food technology

food technology

Lubrication and sealing-optimized linear guide

Schaeffler presents linear guides for food technology with optimized seals, wipers and long-term lubrication units.

To the post

Mobile Machinery

Mobile Machinery

Flexible, customizable gateway for agricultural technology

IFM Electronic is presenting the Isobus Gateway at the Hannover Messe, which is designed for agricultural equipment and can be specifically adapted.

To the post

Energy Technology

Energy Technology

All Electric Society – vision of the future of connectivity

At the Hannover Messe Preview, Harting gives an outlook on the Hannover Messe and draws the future picture of an “All Electric Society”.

To the post

Inverter

Inverter

Certified servo controller with Profisafe interface

At Logimat, Wittenstein is presenting a safety-certified servo controller with a Profisafe interface and integrated safety card for AGVs.

To the post

EXHIBITION SPECIALS

Industry fair news

Hannover Messe promotes energy for sustainable industry
As a networked industrial ecosystem, the exhibitors demonstrate how climate neutrality can be achieved through the use of electrification, digitalization and automation under the guiding theme of Energizing a sustainable Industry.
Control Fair 2024 | The industry is already looking forward to Stuttgart
Control 2024, the important international trade fair for quality assurance, will take place from April 23rd to 26th in Stuttgart. The trade fair places a particular focus on automation and digitalization.
SPS Nuremberg: Now in 16 halls!
The SPS – Smart Production Solutions from November 14th to 16.11th. 2023 will see significant growth in the trade fair compared to the previous year and is on the way to pre-Corona levels.

In order to ensure that the interface assembly for power and signal transmission can be efficiently and safely integrated into the company's own production processes for energy chains and Cablessystems can be integrated, cooperates Igus with Harting as a supplier and design-in partner of modular "Han" industrialConnectors. Christian Stremlau and Guido Selhorst give insight into the cooperation. 

Harting Igus plug

Contents

IIoT redefines connectivity - interview

29.11.2018/XNUMX/XNUMX | Igus and Harting work as part of a technology cooperation in matters Energy chain and Connectors together. On the SPS IPC Drives we have Guido Selhorst, Head of Corporate Market Communication, Harting AG & Co. KG, Espelkamp and Christian Stremlau, Head of readychain & readycable division, Igus GmbH, Cologne. We asked the following questions: 

  • How did it come about this cooperation and what role do igus and Harting play in it?
  • Herr Stremlau: Ask us that Connect modulesystem from the igus point of view.
  • Mr. Selhorst: From the Harting perspective, what can the system do under the name Han Modular Flexbox?
  • Why did you give the system its own name and therefore not a common name?
  • What other common Projects are conceivable, or are there already some in the pipeline?

 

Energy Chain Connector Cooperation

24.03.2017/XNUMX/XNUMX | Polymer-bearings and energy chainssystems form the two business areas of igus. The company supplies ready-to-connect energy chains including all components. The cables for supplying the plants with data, power and signals are safely routed through the plastic chains. Depending on customer requirements, special guide channels support the quiet and low-friction running of the chains and minimize the load on the lines.

Han modular von Harting supplies the appropriate interfaces. The modular Connectorsseries includes around 100 modules from which connectors for the transmission of signals, power and gaseous media can be configured depending on the requirements. Holding frames and adapters enable the combination of a wide variety of modules to form connectors, which can be used in all the essential housing types integrate.

From the high current transmission to the Profibus network


What is special about Han-Modular is the possibility hybrid configure connectors. Automated production lines require an intensive exchange of data and signals for control. Han-Modular connectors can therefore not only transmit power in an interface, but also optical and electrical signals as well as processed compressed air.

In detail, the modular connector range includes contacts and inserts for outputs of up to 200 A / 1000 V, high-voltage modules for a maximum of 40 A / 5000 V and signal modules with a packing density of up to 25 contacts per individual module (4 to 10 A / 50 to 250 V. ). Ethernet Cat 6Ainterfaces are available as well as modules for fiber optic transmission in single and multimode fibers as well as various BUS technologies (e.g. Profibus). The Han Pneumatic Module also opens up options for transferring treated compressed air up to 10 bar.


With Kuka from the Harting connector to robot connectivity


Cost-effective processing and other reasons

In addition to the ability to integrate into its own production, the following criteria were decisive for the plastics specialist when selecting Harting as a supplier for modular connectors:

  • Quality and innovation of the components
  • Delivery reliability and competitiveness
  • Variable cable assembly based on Han-Modular
  • Clarity in the design of the products such as easy installation.

“An important aspect is that the connectors can be processed particularly cost-effectively in large numbers using crimp contacts. After all, the crimping can be fully or partially automated as required,” says Christian Stremlau, Head of the Readycable + Readychain division at igus. “We have found a preferred supplier in Harting,” Stremlau continues. "The interaction of high material availability on the part of igus and exact adherence to delivery dates and high quality on the part of Harting ensures that customers always receive short delivery times and the best quality at fair prices from us," says Stremlau.

Optimum integration of the interface assembly

igus is currently optimizing its production with the aim of efficient industrial one-off production. A decisive criterion is always the simplicity: “The Rectangular connector are versatile and yet easy to work with,” says Stremlau.

This is why the standards required for assembling the interfaces can be effortlessly transferred to the other twelve igus factories all over the world. "As a result, our customers around the world receive our fully assembled, high-quality energy chain systems even faster - supplied with industrial connectors from Harting."

An particularly attractivehe item in the connector manufacturer's program for the automation specialist is the "Han-Modular" series. By integrating several contact inserts with different functions in one housing, interfaces can be dimensioned in a particularly space-saving and cost-conscious manner. Modular connectors adapt flexibly to the respective installation situation. The installation and maintenance costs are reduced.


The whole world of igus robots


Because the Han Modular program is so extensive, it almost always allows for the right adaptation. Limits are only reached when cable specifications do not leave sufficient wiring leeway from a purely physical point of view. However, such problems can usually be remedied by careful dimensioning.

In some cases, power and signal transmission must be specially shielded from each other. The connector specialist offers its own specific solutions for this, such as this Han Shieldedmodule on. The latter is used to transmit highly sensitive voltage signals that must not be exposed to any external influences.

You might also be interested in...

Electrical Wires | From cable to assembly

Electrical Wires | From cable to assembly

Cables and wires are the lifelines of modern technologies in industry. From power transmission to...
Reduce carbon footprint | That's how it's done!

Reduce carbon footprint | That's how it's done!

More and more companies want to reduce their CO2 footprint in order to combat climate change with various...
Single Pair Ethernet | for IIot and Industry 4.0

Single Pair Ethernet | for IIot and Industry 4.0

Single Pair Ethernet (SPE) forms the basis for the infrastructure that supports the Industrial Internet of Things (IIoT) or...
Technology cooperation Harting – SSI Schäfer

Technology cooperation Harting – SSI Schäfer

As a general contractor, SSI Schaefer largely relies on standardized assemblies in order to streamline the procurement...
Sustainability plastics – CO2 neutral with recycling

Sustainability plastics – CO2 neutral with recycling

The importance of sustainability in the plastics industry is growing. Recycling is becoming more and more important...
industrial housing | Indoor and outdoor control boxes

industrial housing | Indoor and outdoor control boxes

Industrial housings have to withstand tough environmental conditions both indoors and outdoors. To do this, manufacturers...

Author information
Stremlau Selhorst

The authors are Christian Stremlau (l.), Head of the Readychain + Readycable business unit at Igus and Guido Selhorst, Head of Market Management at Harting Germany.