Get on the plane and just a few hours later get off again thousands of kilometers away: Airplanes take us to almost any place around the world. Innovative scan technologies from Pepperl + Fuchs can help ensure that an aircraft is not only comfortable, but above all safe.  

Frankfurt International Airport, 05: 00 in the morning: Many passengers aboard the machine are still rubbing their eyes, it was a long flight. The day before they were all still in Shanghai, today they enter German soil again. Every day, countless people use the airway to travel quickly and easily to other countries and distant continents.

Never before have so many travelers - whether on business or pleasure - traveled by plane each year as they do today. At the major airports in the world, huge machines take off every minute or even every few seconds to bring people to every corner of the earth. But it is not just the timing that motivates people to travel by air: it is still considered the safest means of transport in the world. To keep it that way, airplanes are strictly controlled and regularly checked. Not the smallest part may be defective, because the consequences of a failure or malfunction in the air can be fatal. This applies to the electronic components that are installed in and on the aircraft in large quantities, as well as for the individual components of the overall construction.

Tons fly high in the air

Before a steel bird with a weight of several hundred tons can rise into the air, the greatest engineering, but also the highest precision, flow into the production. Because many conditions must be met in order to generate the aerodynamics that make an aircraft fly at all. For this reason, the flawless design and condition of the aircraft are essential. Cracks and bumps in the outside area, for example, can have a very negative effect on the aerodynamics of an aircraft and must be avoided at all costs.

2D lidar sensor for more flexible transport shuttle from Montratec

One particular challenge is the sheer size of an aircraft. Even a single component such as the wing is several meters long, the fuselage is many times longer, and the turbines impress because of their considerable diameters. Thus, the assembly of the components of an aircraft is already a highly demanding matter in which millimeter precision is required. Technologies capable of detecting such large components in their full height, width and length can significantly assist aircraft manufacturers and maintenance personnel in proper assembly, quality control and periodic checks.

Game of lidar sensors

Pepperl+Fuchs offers the right technology for this task: an interaction of several 2DLidar sensors enables precise recording of the assembly and maintenance halls as well as the aircraft and components located therein. For this purpose, the precisely calibrated, high-precision sensors are positioned at different locations and capture the objects from different angles. The data volumes from all 2D lidar scanners are merged into a three-dimensional point cloud, creating an exact digital image. This allows personnel to see exactly how the components are constructed and in which positions they are located. This is helpful, for example, when machines and parts have to be positioned precisely when assembling the individual components in order to avoid damage caused by collisions.

Lidar sensor recognizes the environment in four dimensions

But even before the individual parts of an aircraft come together to form a whole, the system can support the manufacturers and their fitters from several 2D scanners. Because it is not uncommon for the individual components of an aircraft to be manufactured at different locations - it can happen that the fuselage is made in Germany, but the wings are made in France or in the USA. To ensure that the components fit together during final assembly, the scan data and the resulting 3D image can always be matched to plans and models.

Data in the cloud

The data collected by multi-sensor systems are immediately available in the Neo Neon Cloud of the Pepperl + Fuchs subsidiary Neoception in a standard data format. This means that the three-dimensional image of the aircraft or its parts can be retrieved anywhere in the world - given global distributed manufacturing facilities, this is a key advantage. Because not only the manufacturer of the sash itself can match the construction with the plan. The production sites of the other components also have access to the object scan and can use the 3D data for further processing, for example to optimize components or even base their own production.

Transferable to many areas

What works in aircraft is also helpful in many other applications. Intelligent multi-sensor systems with scanning technology can not only capture large components and entire rooms, but also accurately scan small and large objects, machines and people. The data merged into 3D point clouds is immediately available for further processing via the Neo Neon Cloud. So they are available anywhere in the world and can be used directly for production, for example - also individually in lot size 1. This makes it possible to flexibly implement customer requirements and requirements and enables companies with globally distributed production sites to optimize their system utilization and thus increase efficiency.

You might also be interested in...

Industrial radar sensor with CAN interface

The new radar sensors from Pepperl+Fuchs are extremely compact. Housed in an IP68/69 housing, they are...

Artificial Intelligence | trends and developments

Artificial Intelligence (AI) will change our lives in ways we never thought possible. It...

RFID and Barcodes | Industrial identification

Efficient and transparent processes are essential in modern production. Possibilities for optimization offer here...

RFID reader and barcode scanner for identification

Pepperl+Fuchs is, among other things, Specialist in RFID and optical identification systems used in industrial manufacturing and...

battery production | Facts and Technologies

High-performance vehicle batteries for electromobility are manufactured in highly automated processes. As the...

Level sensor for every level measurement

Level sensors, also known as level gauges or level sensors, are devices used to measure the...