German Chinese (Traditional) English French Hindi Italian Japanese Portuguese Russian Spanish
Current page: Start Specials Renewable Energies Wind Energy Adhesive Lubricant for ring gear and pinion drives in wind turbines
  • Medizintechnik
    Medical Technology
  • Angewandte Forschung
    Applied Research
  • Erneuerbare Energien
    Renewable Energies Biotechnology, solar energy, hydropower, wind energy
  • Automobil
    Automobile Drive, drive train, electrical, chassis, body, interior, measuring, testing, diagnostics
  • Mobile Arbeitsmaschinen
    Mobile Working Machines
  • Mikrosystemtechnik
    Microsystem Technology
Wednesday 19. June 2013
Get Adobe Flash player
27. July 2012
Hits: 1679
  • Drucken

klueber0712HusumWindEnergy 3 Hall, Booth E08

Downtime, short maintenance intervals, complex vendor management, high storage costs for lubricants and gear oils and other challenges affecting the success of the operators of wind turbines. Klüber presents a new adhesive lubricant for trouble-free operation.

The adhesive lubricant Klübersynth AG 14-61 is designed for sprocket and pinion drives and plain bearings such as yaw bearings in wind turbines. The wide operating temperature range and thus allows these synthetic spreadable even at low temperature lubricant smooth operation. Klübersynth AG 14-61 can be administered using centralized lubrication systems up-30 ° C.

Because of its composition from selected solid lubricants and additives it provides excellent wear protection and thus helps to increase the life of the ring gear and pinion drives. Another advantage of the new lubricant is its diversity. Since Klübersynth AG 14-61 both drives as well as sliding bearings shows the best results, it helps to reduce the number of used lubricating grease.

Another contribution of the manufacturer         This e-mail address is being protected from spambots! Must be enabled to display JavaScript!

Applied Research

image image image
An electro-optically active liquid crystals set the course for the light Tuesday, 12. March 2013 08: 04 Fiberglass as optical transmission media ensures maximum data rates over long distances and are unrivaled today in public communications networks. To use the full potential of optical fiber, optical switches and modulators can be used which will bundle the different optical signals and channel. The Fraunhofer Institute for Photonic Microsystems IPMS in Dresden developed optical switches and modulators based on electro-optical waveguides in special liquid crystals. These liquid crystals react not only very sensitive to electric fields. read more
Transversal projects of research institutions of East Westphalia-Lippe Monday 04. March 2013 13: 35 Cover story in five interdisciplinary projects Top cluster OWL (East Westphalia-Lippe) provide application-oriented research institutions willing results of advanced research for the company. Covers the areas of self-optimization, human-computer interaction, intelligent networks, energy efficiency and system engineering will be covered. This paper presents the various Forschungsprojete: read more
Intelligent manufacturing of reliable copper bonding connections Wednesday 13. February 2013 08: 48 Research Report in mechanical engineering and automotive engineering to control current and voltage through the power semiconductor modules and connected. The electrical connection of the individual electrodes in these modules is via so-called bonding connections. The research project "Itsowl-Incub" under the lead of Hesse GmbH deals with the production of reliable copper bonding compounds to replace the aluminum compounds due to their limited physical properties. read more

Automobile

image image image
Easier pretensioners with low component stress Tuesday, 18. June 2013 11: 41 TRW will begin to supply its belt tensioner "Snake Retractor Pretensioner" (SPR4). The SPR4 used for power transmission a serpentine plastic piston instead of metal components as they are used in conventional systems. Thus automotive simplifies the design, reduces weight and achieve compact external dimensions. The technology comes in a variety of vehicle models from small cars to SUVs in Europe, North America and China in series. read more
RF chip capacitor series for high-tech applications in the automotive Tuesday, 11. June 2013 07: 24 AVX Corporation introduces a new series of AEC Q200-qualified RF chip capacitors for automotive applications. The new automotive capacitors of the series "U" in 0402 or 0603 case with C0G (NP0) dielectric characterized by ultra low ESR values, high quality factors (Q) and low Losschwankungen according to the requirements of the standard AEC Q200. read more
Energy efficient refrigeration system for glossy surfaces of automotive trim parts Monday, 10. June 2013 13: 32 Gloss is "in": This is immediately clear if one then looks at new car models, such as the radiator and screens look and how many refine the trim plate. An automotive supplier has taken a 80 m long anodizing plant for the surface treatment of panels and trim strips in operation. A refrigeration system of L & R Refrigeration ensures that the electroplating baths are always cooled accurately and consistently - with minimum energy consumption. read more

Renewable Energies

image image image
Solar battery with up to 60 kWh of storage Monday, 17. June 2013 10: 54 Intersolar B5 Hall, Booth 160 Prosol Invest presents its new product line Solar battery Comfort with a total 8 models, including a model with a capacity of 60 kWh. The series includes a number of all-new or significantly advanced features that offer even greater value. The solar battery Comfort models meet the requirements of the new KfW funding. read more
Certified Coldclimate safety brake for wind turbines Monday, 10. June 2013 14: 57 Is in the generation of wind energy's speech Wind power brakes, Then usually the built in pitch and yaw drives Safety brakes meant. Some manufacturers provide for applications in cold regions "Cold Climate" versions (CCV). But not everywhere where CCV is on it, it is really in it. The CCV version of Mayr power transmission was certified to-40 ° C by Germanischer Lloyd (GL) as the only electromagnetic safety brake for applications. read more
Solar controller for solar thermal systems for retrofitting Friday, 31. May 2013 09: 06 The solar controller "Solar Control" of Afriso can be used for control and monitoring of solar thermal systems and is also suitable for retrofitting existing plants. It is designed for system-independent regulation and monitoring. The microprocessor used in controls, regulates and displays all program features such as solar control, temperature limit, cooling operation, defrost, antifreeze and leisure function. read more

Medical Technology

image image image
Protection coating with medical authorization to ISO-10993 5 Wednesday, 12. June 2013 05: 51 Dymax expanded with the 1901 MD-M its product portfolio in the field of protective coatings. The high performance protective coating may be cured with LED and mercury vapor lamps in the UV range. The material was primarily developed for the coating of very small printed circuit boards, which are used in hearing aids, medical pumps and other microdevices. Thieves stratification is tack immediately after curing and preventing potential defects due to premature processing of the coated parts. read more
Intelligent hip prosthesis with integrated sensors Wednesday, 05. June 2013 18: 37 Transponder systems are becoming increasingly important in daily life. If used in the simplest variant as identification or storage medium so by extension sensors with additional information about the objects or their environment can be obtained. Especially in the trade and logistics sector can thus new systems and concepts, for example for control of goods, are used. In the technical field miniaturized autonomous measurement systems and complex in medical implantable diagnostic systems are feasible. read more
Optimal microscope imaging during surgery due to capacitive sensor Monday 22. April 2013 16: 21 In surgery a perfect view of the surgical field is essential. At this point, the physician is often supported by a surgical microscope. To maintain the field of view of the microscope, stable, a high-precision capacitance sensor is used. The optics of the operating microscope is mounted on tripod long arms. This allows the surgeon the best possible positioning of the microscope and the operating crew freedom of movement. The long boom requires constant correction on the hinges to keep the vision and focus range of the microscope for the physician stable. This is the capacitive measuring system "Capa NCDT 6019"By Micro-Epsilon employed. read more

Microsystem Technology

image image image
Small, high-resolution miniature table with 2 nm resolution Wednesday, 12. June 2013 10: 18 Physik Instrumente (PI) , the new LPS 24 series before. In the dimensions 24 33 × × mm 20 the Miniaturpositioniertische 15 mm travel combined with nanometer precise Auflösung.Damit they meet key requirements for the positioning of optical or mechanical components or for the adjustment and manipulation of samples in application environments that allow only a limited space. read more
Based on the principle of magnetic levitation for nano-precision positioning Wednesday, 29. May 2013 10: 16 For inspection and manufacturing systems in the semiconductor industry, for example, are now mostly air bearing technology and magnetic linear motors in use. The precision requirements will in future continue to rise up to the nanometer range. Moreover, such systems reach their limits when applications require working under vacuum or nitrogen atmosphere. The drive specialists Physik Instrumente (PI) now have this issue and adopted the new electromagnetic positioning system "PI Mag 6D" already achieved promising results. read more
Smallest miniature sensor for accurate distance measurements Wednesday, 15. May 2013 08: 30 With the inductive analog sensor IWFM 05U9701 / S05 hat Baumer expanded its portfolio of miniaturized sensors. Thanks to its compact design with 5 5 x mm x 32 it can even be installed in very tight spaces. This sensor is derkleinste rectangular inductive sensor with analogue output measurement worldwide. Its small size allows distance measurements in applications that were not possible until then, and indeed anywhere where a sensor with a cylindrical housing is too long. read more

Mobile Working Machines

image image image
Power Modules automotive qualification for the highest power density Tuesday, 14. May 2013 14: 28 Infineon introduces a new series of "Econo dual" 3 IGBT modules that are qualified according to automotive standards. The new portfolio aimed specifically at applications in commercial and construction vehicles as well as agricultural vehicles where reliability is an important criterion. The qualification requirements in accordance with automotive means, among other things, that the modules have a significantly improved robustness against thermal cycling and shock, while a new, softer freewheeling diode additionally improves the EMC behavior. read more
Energy-efficient variable displacement axial fan drive improves in Construction Sunday 07. April 2013 12: 02 Bauma A4 Hall, Booth 319 / 414 The holistic approach helps Rexroth 4EE (Rexroth for Energy Efficiency) manufacturers to use their equipment to optimally with effective use of energy. With flexible solutions and consulting to manufacturers to optimize both current series of vehicles as well as design new models to meet, for example, the animal 4 standard. At the fair, Bosch Rexroth, as with the Axial Variable A1VO can achieve this goal. read more
Density rotation systems for construction and in extreme missions Wednesday 27. March 2013 09: 58 bauma Hall A4 stand 214 Alpha Gymnastics shows the newly developed standard program to build rotors that are available in three sizes depending 10 AR, AR and AR 15 25 of tons of excavators available. The integrated 4-point bearing absorbs all axial and radial forces and the resulting tilting. By the mechanical separation of the main storage and the hydraulic rotary joint tightness is ensured even in extreme missions for a long time. The fixing screws for mounting and receiving devices are constructed so that they have an optimal elongation length and thereby can not solve during the operation. read more