Online magazine for design and development

Here you will find everything that the designer needs for his design and the development engineer for his new development, from the draft to quality assurance in production, such as new products, their applications, new technologies or research results. Company reports as well as topics on technological and megatrends in all industrial sectors complete our range of industry news. Let's start with the news.

Company News

Ebm-Papst wants to sell industrial drive technology to Siemens
The Ebm-Papst Group has announced that it will sell its Industrial Drive Technology (IDT) division to Siemens AG. Both sides have signed a corresponding agreement.
Jumo's new Sensilo plant construction is progressing
Jumo is building a factory in the technology park for the production of temperature and pressure sensors with a production area of ​​around 13 m². At around 000 million euros, the new building is the largest investment in the company's history.
3DExperience Word 2024 in Dallas
At 3DExperience World 2024 in February in Dallas, Texas, Dassault Systèmes celebrated the event's 25th anniversary. The annual user meeting supports the global community in the development of future-proof products and processes.
Michael Koch GmbH moves into a new workshop
There is now more space available in Michael Koch's “Factory” for the assembly of customer- and machine-specific safe braking resistors. The new, modern hall was recently “taken by storm” by the employees.
Elon Musk is suing OpenAI for profit-making
Elon Musk files a lawsuit against OpenAI and CEO Sam Altman, accusing them of breach of contract because the company, which was originally designed as a nonprofit, is now operating for profit.
AREAS OF EXPERTISE

Industry news for your design and development from the specialist areas

switch cabinet

switch cabinet

On to the intelligent drive train for predictive maintenance

The Roba-brake-checker module or the torque-measuring shaft coupling from Mayr ensure intelligent safety in smart production.

To the post

plastics

plastics

The first 100 Igus bikes hit the streets

The first 100 Igus Urban Bikes hit the streets and an in-house production facility with a capacity of 10.000 bicycles is set up in Cologne.

To the post

Couplings

Couplings

Torque measuring shaft coupling

The smart steel multi-plate coupling Roba-drive-checker from Mayr can do more than just transmit torque and compensate for shaft misalignment.

To the post

Robotic

Robotic

Programming robots for cable handling

As an exhibitor in the Application Park at the Hannover Messe, Artiminds Robotics is presenting a cable handling application for precise cable harness assembly.

To the post

INDUSTRY SPECIALS

Industry news for your design and development from the branches

food technology

food technology

Lubrication and sealing-optimized linear guide

Schaeffler presents linear guides for food technology with optimized seals, wipers and long-term lubrication units.

To the post

Mobile Machinery

Mobile Machinery

Flexible, customizable gateway for agricultural technology

IFM Electronic is presenting the Isobus Gateway at the Hannover Messe, which is designed for agricultural equipment and can be specifically adapted.

To the post

Energy Technology

Energy Technology

All Electric Society – vision of the future of connectivity

At the Hannover Messe Preview, Harting gives an outlook on the Hannover Messe and draws the future picture of an “All Electric Society”.

To the post

Inverter

Inverter

Certified servo controller with Profisafe interface

At Logimat, Wittenstein is presenting a safety-certified servo controller with a Profisafe interface and integrated safety card for AGVs.

To the post

EXHIBITION SPECIALS

Industry fair news

Hannover Messe promotes energy for sustainable industry
As a networked industrial ecosystem, the exhibitors demonstrate how climate neutrality can be achieved through the use of electrification, digitalization and automation under the guiding theme of Energizing a sustainable Industry.
Control Fair 2024 | The industry is already looking forward to Stuttgart
Control 2024, the important international trade fair for quality assurance, will take place from April 23rd to 26th in Stuttgart. The trade fair places a particular focus on automation and digitalization.
SPS Nuremberg: Now in 16 halls!
The SPS – Smart Production Solutions from November 14th to 16.11th. 2023 will see significant growth in the trade fair compared to the previous year and is on the way to pre-Corona levels.
ruebsamen10415

In all branches of the supply industry, the efficiency requirements of the wind energy industry promote the innovative strength of companies. This not only applies to the manufacture of rotors, drives, bearings and controls, but also to the area of ​​shaped sheet metal parts. The supplier Rübsamen, for example, uses two forming processes to manufacture highly resilient precision components for onshore and offshore technology. The company has adjusted to the demands of wind turbine manufacturers for small and medium-sized quantities.


No matter whether on- or offshore technology: the wind power industry is characterized by continued strong growth. In 2014 alone, 400 new wind turbines were connected to the grid, and soon almost 10% of German electricity will be generated by wind power technology - with an upward trend. Due to its ability to manufacture high-quality sheet metal parts very economically, even in small to medium batch sizes, the sheet metal parts supplier also benefits from this. With its high degree of specialization in the two metal forming and deep-drawing processes, it can fully meet this desire of plant manufacturers in the wind power industry. For example, the company is currently supplying its wind turbine customers with many ready-to-install sheet metal parts made of high-quality steel grades, aluminum alloys and non-ferrous metal alloys.

Produce steel without thermal stress

ruebsamen20415Numerous plant manufacturers in the onshore and offshore industry not only have large, thin-walled housing components manufactured, but sometimes also very thick-walled molded parts. A typical example of this is a solid steel abutment for holding rubber elements that are installed in wind turbines to dampen vibrations.

The realized high-strength steel part measures 240 x 190 mm and has a wall thickness of 7,5 mm. Its geometry is characterized by a mounting plate drilled four times, from which a cone with a basic conical shape protrudes. The rubber element will later be stored in this cone. The decisive aspect for the customer: The supplier can use the metal spinning technique to produce the complete abutment in one piece and without major thermal stress for the steel structure. In this way, the plant manufacturer receives a highly resilient quality component "Made in Germany".

Metal spinning is a cold forming process, sometimes also known as extrusion. It is very raw material saving and does not require expensive mold tools. In many cases, it therefore proves to be extremely energy-efficient and economical - especially when small to medium-sized quantities are required. In addition, metal spinning scores in the production of rotationally symmetrical components that can be produced without any seams and have very good strength values.


Mayr Renewable EnergiesCouplings, brakes and monitoring for the wind turbine


If larger quantities of up to 100.000 are to be produced or if the component geometry precludes the use of metal spinning, the manufacturer switches to deep drawing in accordance with DIN 8584. In its modern press park, the company then produces formed parts with diameters of 20 to 2000 mm, edge lengths of 2000 x 1500 mm and wall thicknesses of 0,5 to 15 mm.

High flexibility thanks to process diversity

In addition to modern laser cutting systems and CNC metal centering presses, numerous deep drawing machines with up to 600 t pressing force are in operation in the machine park. In addition, the company covers many subsequent process stages with other processing methods - from embossing, punching and punching to surface technology. In recent years, the competencies in assembly manufacturing (stainless steel, steel, aluminum) have also been greatly expanded. For this purpose, the supplier not only uses its own 3D design and in-house toolmaking, but also its meanwhile considerable capacities in automated welding. Here, in addition to the flash butt and projection welding process, he also uses laser and MIG / MAG welding.

Helmut Rübsamen is certified according to DIN ISO 9001 and approved as welder specialist. The company is therefore also recognized as a partner for the manufacture of safety-relevant components. Among others, 3D measurement technology and automated balancing technology are used for quality assurance.

You might also be interested in...

Components for rubber metal buffers for vibration protection

Components for rubber metal buffers for vibration protection

Where drives are installed and technical components are in motion, designers have to integrate vibration dampers into their...