German Dutch English French Italian Japanese Portuguese Russian Spanish
Logo 2014
  • Fields

    Applications, technical articles, product news from drive technology to Materials

    Read more
  • Specials

    Applications, technical articles, product news from many specific industrial sectors

    Read more
  • Trade Fairs

    Exhibition calendar for the industrial fairs the coming year with Show Specials for developers

    Read more
  • 1
Monday 01. September 2014

Fachgebiete IconSpecials IconMessen IconInterview IconWebcasts Icon

Literatur IconNews IconKarriere IconVeranstaltungen IconNewsletter Icon

News from the industry

Products, technical articles, applications, features, interviews, videos, news ...

Latest News

  • Beckhoff
  • VDW
  • SMC
  • Copper Development Association
  • Rittal
  • KTR
  • B + R
Rockwell Automation, Inc., Milwaukee, Wisconsin, USA, Beckhoff Automation, Verl, Germany, granted a license to the use of more than a dozen American and European patents linear motor. Of this Agreement, a patent infringement case was settled amicably. "We welcome the amicable resolution of this matter, remain in the protected our patent rights. Under this agreement technologies, our customers' linearly independent motor cart "in a wide range of different machines integrate", commented Marco Wishart, Vice President... Read more
In the second quarter 2014 the orders of the German machine tool industry rose in the second quarter to 2013 1%. Domestic orders were 16% over the previous year, the orders from abroad, however, brought 7% lower. For the first half of the orders listed total 2014 6% over the previous year. Domestic orders rose by 18%, foreign demand lost 1%. The general uncertainty due to numerous crises can foreign buyers reluctant to make new investments. Read more
smc0314SMC Pneumatics continues to expand: The automation invested several million euros in 32 new, highly modern production, prototypes and special machines. Previously 2013 were already hired more than 70 new employees and for office, warehouse and grounds greatly expanded the German headquarters in Egelsbach earlier this year. Now follows the modernization of production and research and development. Read more
To the important function metal copper one must also worry about the long term, confirmed the German Mineral Resources Agency (DERA) in a discussion of the German Copper Institute with media representatives and the WVM. In this context, often quoted false reports were corrected so that the current copper stocks are sufficient only 40 years: Read more

Rittal Lit IT world in pocket size

The world of information technology is complex and requires today of IT managers and -Entscheidern comprehensive know-how. Valuable background information and decision-making basis in IT now offers the compact reference book "The World of IT infrastructures" out of the Rittal technology library. The work conveys to 160 pages fundamental and expertise on IT infrastructures as well as standards and regulations. Decision-makers and technicians receive a guide to selecting the right system components and IT infrastructure solutions. The textbook shows... Read more
KTR0314KTR build the headquarters in Rheine and built a new center for further research and development with multifunctional assembly hall. On 8800 m² arise here-the-art workstations. Completion is scheduled for March 2015. The company building will be one of the most modern in NRW. With the construction of the company realized the largest investment project in company history. Read more
BR10314 69 leading plastic machinery manufacturers have introduced at Chinaplas 2014 new machines based on Bernecker + Rainer Control technology based. The stand was the hub in terms of control solutions for plastic machines on the world's second largest industry event in the plastics industry. Especially in the field of all-electric injection molding machines offers B + R is the only automation manufacturers in the Chinese market a complete solution. By using Powerlink this solution meets the stringent requirements of the industry in precision and efficiency.... Read more

Drive Systems

> <
  • 1
  • 2
  • 3
Article by Tox Pressotechnik
Security Holding brakes for pneumo cylinder

tox start neu

Automation

  • Browser-based HMI with Modbus for all automations

    Hilscher0314 About "Net Scada Modbus" of Hilscher can be observed and controlled with conventional web browsers automated systems. Agent installed on mobile phones, tablets or computers, free web browser, the user is able to access at any time and from anywhere on his personal web application. The Net Scada Modbus connects to the automation system... Read more
  • Easy data management for control systems without performance loss

    Inasoft0314 Simple, fast and flexible data exchange between PLC, robot controllers and databases - this was hardly possible so far without much effort or performance losses. The "SQL4 Automation Connector" of Inasoft manages with just a few clicks. To create a database connection using the connector, requires only a few settings. The solution controls have high... Read more
  • Developer library for image processing for simple application development

    Rauscher0314 Technical Articles

    The release of Matrox Imaging Library MIL 10 (Sales Rauscher) supports current platforms, increased flexibility and performance of several tools and makes application development easier and faster. MIL 10 now supports Microsoft Windows 8 and the Linux distribution Ubuntu LTS 12.04. In addition, there are performance improvements in the vector-based... Read more

> <
  • 1
  • 2
  • 3
Articles by Rauscher
Developer library for image processing for simple application development

Rauscher Start

Electrical Engineering

  • Energy-efficient drives for all types of engines

    Danfoss0314 The new energy-efficient motor technologies such as permanent magnet motors (PM motors) are on the rise. Because they offer a significantly higher energy efficiency compared to the widely used standard asynchronous motors. In addition, the synchronous reluctance motor moves slowly into focus for individual applications. To be able to drive all of these types of engines with only one converter platform, Danfoss offers... Read more
  • Dynamic energy storage in Crossbar robot parts increased transport

    Koch0314 In the recently opened Automation Tech Center at the Schuler location in Gemmingen recently the crossbar new generation of robots 4.0 was presented. With the new robot of press manufacturers new ground not only in design but also in terms of energy management and process monitoring. The improved crossbar robot convinces... Read more
  • Also in case of fire safe communication fiber optic cables

    Helukabel0314 With the series " HELUCOM FS90 "offers Helukabel an optical fiber cable, with which also in the event of a fire, the data communication is ensured for 90 minutes. This is especially important for places such as in tunnels, subway tunnels, data centers, in mining and in all other environments where signal to guarantee security in the event of fire.... Read more
> <
  • 1
  • 2
  • 3
Article by Helukabel
Single cable for servo drives with Hyperface DSL interface

Helukabel Start

Fluid Technology

> <
  • 1
  • 2
  • 3
Articles by Busch Jost
Labyrinth technology in piston valves reduces friction

buschjost start neu

Development Office

> <
  • 1
  • 2
  • 3
Article by Asus
Monitors performance CAD workstation

asus start neu

Machine Elements

  • Rüstfreundliche clamping device from the modular

    hainbuch0314 AMB Hall 1 stand E12

    At Hornbeam one has conceptually approved by the "individual" chuck. Therefore, for years of fixtures manufacturer uses a dimension for easy set modular system that allows the user, even with custom workholding solutions quickly convert accurately and with minimal effort. With the modular system, the base clamping device on the remains...
    Read more
  • Reamer for high-precision drilling with tolerances of ± 0,003 mm

    HAM0314 AMB Hall 1 as G17

    HAM presents the newly developed reamer MT3. It is particularly suitable for very precise hole machining with high demands on dimensional accuracy and surface quality. The reaming achieve diameter tolerances of ± 0,003 mm, a form accuracy of the bore to 0,005 mm and a surface finish of Ra = 0,3 to 0,4...
    Read more
  • Smooth-running wheels for heavy loads

    tellure0314 Especially for the manual handling of loads is Tellure Rôta without much effort the "62ER GO" before. The new wheels series is particularly suitable for manual and mechanically operated cars in production environment and logistics. The smooth-running wheels are available with diameters of up 125 200 mm and with a load capacity of 3,5... Read more
> <
  • 1
  • 2
  • 3
Success Story of Dr. Tretter
Compact C-Rail Systems in Horizontal Bandsaws

Tretter start

Measurement

> <
  • 1
  • 2
  • 3
Article by Micropelt.Fritz
Sensor protects against fires in high power distribution

micropelt start neu

Mounting + Joining Technique

> <
  • 1
  • 2
  • 3
Article by Tox Pressotechnik
New arc process with Einbrandstabilisator

Fronius Start

Materials + Procedures

> <
  • 1
  • 2
  • 3
Articles by Rio
Coating allows lifetimes of more than 1100 h in the salt spray test

rio start neu

Applied Research

  • The fuel cell for home

    fraunhofer0314 neu Research Report

    It converts chemical energy directly into electrical. But the market breakthrough of fuel cell was made so far. Too complex were the systems. Fraunhofer and Vaillant have developed a simple device for home use. The researchers were responsible in particular the construction of the prototype, the design of the overall system, the design of ceramic components and... Read more

  • Low-loss design increases performance with plastic gears to 75%

    handtmann0314 neu Together with the Research Centre for Gears and Gear Munich Technical University have researched in the past four years, according to optimized tooth geometry with plastic-steel gear pairs Handtmann Elteka and SPN Swabia precision. Now are the results. Main advantage of using plastic gears is their dry running ability. Disadvantages here are the resulting high friction coefficients in the tooth contact... Read more
  • Li-Fi module doubled data rate - 10 Gbit / s

    farunhofer02214 neu To transfer large amounts of data at lightning speed and without annoying cable from one device to another, the researchers at the Fraunhofer Institute for Photonic Microsystems work IPMS from using light as a transmission medium. Optical wireless data transmission is to serve as an alternative to wired data transfer and established standards such as USB 3.0, USB 3.1,... Read more
> <
  • 1
  • 2
  • 3
Research Report of Fraunhofer
The fuel cell for home

fraunhofer start neu

Automobile

  • Efficiently charge electric cars inductively from the front

    Fraunhofer0314 Research Report

    Our toothbrushes and mobile phones upload now fully on contact. May soon follow electric cars. Researchers at the Fraunhofer Institute for Integrated Systems and Device Technology (IISB) have developed a highly efficient and cost-effective technology for it. Although recharge electric cars via a contactless induction is still in the future. The loading from the front, however, a new... Read more

  • Design elements made of carbon set Motorsport Accents

    techart0314 Techart complements its aerodynamic programs for Porsche models with attractive design elements in carbon fiber. Characterized by light weight, precision surface processing and individual design options, the Sport Package Carbon is thus Motorsport accents. The company uses carbon as a material already intensively as a crucial element of its refining program for Porsche vehicles. Is not least because of the high quality material appearance... Read more
  • Measuring machine detects precise and repeatable geometrical features of automotive wheels

    werner0314 Motek Hall 1 stand 1420

    IEF Werner has with the Gauging system R2010 developed a fully automated solution that can verify an optimal circuit of their products and document with the manufacturer of automotive wheels and rims. In a system it controls the entire measurement process, reads readings, calculates the characteristics and presents the results in tabular...
    Read more
> <
  • 1
  • 2
  • 3
Research Report of Fraunhofer
Efficiently charge electric cars inductively from the front

Fraunhofer start

Renewable Energies

  • Simulation models to optimize operation of hydropower plants

    Fraunhofer EE 0314 User Report

    The Columbia River Delta in the Northwest offers great potential for hydroelectric power. About 20 000 MW power plants produce there. A simulation model is designed to help optimize the operation of long-range barrages system. Researchers at the Fraunhofer Institute of Optronics, System Technologies and Image Exploitation IOSB develop at their location in Ilmenau information technologies to... Read more

  • Transmission platform reduces cost of energy for wind turbines

    rexroth0314 Wind Energy A1 Hall, Booth 432

    Rexroth has developed a transmission platform at each development step consistently on lowering the cost of energy (CoE) and increasing the reliability Wind Turbines aligned. This is for installations with a rated output of up 3 4,5 MW. The compact gearbox is...
    Read more
  • Drives with high power density for wind turbines

    comer0314 Wind Energy B6 Hall, Booth 339

    Comer Industries develops, manufactures and distributes azimuth and Pitsch drives for wind turbines in all areas. At the show, among other things, the azimuth drives PG and PG-1603 1904 DSP will be on display. The azimuth drive PG-1603 DSP with built-in torque limiter provides high torque density and requires little maintenance...
    Read more
> <
  • 1
  • 2
  • 3
Case Study of Fraunhofer
Simulation models to optimize operation of hydropower plants

fraunhofer EE start

Food and Beverage Industry

> <
  • 1
  • 2
  • 3
Article by Baumuller
Automation systems in thermoforming machines increase efficiency

Baumueller Start neu

Medical Technology

> <
  • 1
  • 2
  • 3
Case Study of IEF Werner
Sonderpalletierer inhalers provide accurate and quick to

ief start neu

Microsystem Technology

> <
  • 1
  • 2
  • 3
Lecture by Physik Instrumente
Micrometer Just position with magnetic direct drive

PI start neu

Mobile Working Machines

  • Electric pump with an attachable compact Li-Ion battery

    cemo0314 neu Compact, mobile diesel filling stations allow time-saving refill of fuel in stationary and mobile devices directly on site. Opposite canisters allows the system to safely transport large quantities and by nozzle without spilling refuel clean. The mobile tank units of the DT-Mobil Easy series of Cemo offer with tank volumes of 125 to... Read more
  • Large display for mobile machines

    ifm0214 neu The "BasicDisplay XL" for mobile machinery IFM Electronic clearly visualized machine functions and is easy to gauge important system messages. For a variety of communication tasks, the unit has a powerful CAN interface. The E1 type approval by the Federal Motor Transport Authority is present. Protected by a continuous film, the sonnenablesbare display offers a resolution of 480 x... Read more
  • Antistatic hose solutions to promote and extraction of bulk materials

    norres0214 neuNorres presenting its vastly extended range of permanent anti-static tubes. These provide a consistent constant conductivity without migrating antistatic agents. A property which strengthens the reliability of these tubes in bulk everyday use and application areas substantially enhances. Read more
> <
  • 1
  • 2
  • 3
Case Study of IMC measurement systems
Wireless Monitoring of harvesters in a field trial

IMC start neu

murrelektronik0112If for installations little space is available, then compact Primary switchers are required. The units in the "Picco" of Murrelektronik suitable for these cases: They take up little space and are still very powerful. The primary switched example, are suitable for use in building systems or in control panels, consumer units or cabinets in the mechanical and plant engineering.

Depending on the application can be selected from four different designs. Because each of them are with output voltages from 12 24 and V are available and to between pluggable spring terminals and firmly soldered terminals can be selected, there are several variants of total 16 Picco. The primary switched ver-paste over a wide voltage input and can be snapped onto DIN rails.

The regulator outputs are short-circuit and overload protected. The output characteristic "power limiter" will also ensure that the power supply is guaranteed even at high Anlaufstömen anytime. Because the power supplies can cause very little EMC radiation, they are except for the industrial environment for use in residential areas. Because they meet the requirements of the PFC standard 61000-3-2, they may also be used without restriction in the public networks.


Another contribution of the manufacturer         This e-mail address is being protected from spambots! Must be enabled to display JavaScript!

 

Personal message

skf peron

SKF appoints Alrik Danielson the new SKF CEO from 1. January 2015. Danielson is the successor of Tom Johnstone.weiter

Overview of trade fairs

Fair Calendar

Next Event Dates

Company Database

firmendatenbank

Search products and You will find here: