Here you will find everything that the designer needs for his design and the development engineer for his new development, from the draft to quality assurance in production, such as new products, their applications, new technologies or research results. Company reports as well as topics on technological and megatrends in all industrial sectors complete our range of industry news. Let's start with the news.
IFM Electronic was able to increase sales again in the 2023 financial year. The preliminary consolidated financial statements show a new sales record with sales of over 1,4 billion euros and growth of 3%.
Jumo has designed further training courses with a view to the currently exciting topics being discussed in individual sectors and offers corresponding seminars as part of the Jumo Campus.
Schaeffler AG's sales increased by 2023% to EUR 5,8 billion in 16,3. Currency-adjusted sales growth was 5,8 percent, which is within the forecast for the 2023 financial year.
The Motion Technology Company Schaeffler will expand production in the USA with a new automotive production site. The new facility will be located in Dover, Ohio.
The Ebm-Papst Group has announced that it will sell its Industrial Drive Technology (IDT) division to Siemens AG. Both sides have signed a corresponding agreement.
AREAS OF EXPERTISE
Drive Technology
Automation
Electrical Engineering
Fluid Technology
Machine Elements
Measurement Technology
Product development
Connection Technology
Materials + Techniques
Industry news for your design and development from the specialist areas
As a networked industrial ecosystem, the exhibitors demonstrate how climate neutrality can be achieved through the use of electrification, digitalization and automation under the guiding theme of Energizing a sustainable Industry.
Control 2024, the important international trade fair for quality assurance, will take place from April 23rd to 26th in Stuttgart. The trade fair places a particular focus on automation and digitalization.
The SPS – Smart Production Solutions from November 14th to 16.11th. 2023 will see significant growth in the trade fair compared to the previous year and is on the way to pre-Corona levels.
Emka fitting parts for electrical engineering and electronics
Details
Hits: 14627
The Emka fittings Group offers hinges, seals, fasteners and accessories for Control Cabinets, in control cabinets, air conditioning and transport. From the portfolio of 30.000 products, we present the New Products. Recent optimization are a Adapter for standard closures and the Multipoint closure, which the company also on the Hannover Messe will introduce.
09.01.2023 | The multipoint locks for Control Cabinets Emka has added a specially developed adapter that can also be used to combine standard Emka closures with the system. This combination allows for use inside and outside the seal.
With the help of adapters all Emka lever handles can be connected to the lightweight solution. If, for example, a bar lock is used, the H-profile used can Plasticrods can also be clipped on to all Emka key plates and swivel handles without the use of tools using the adapter. All closures and rods are made of glass fiber reinforced plastic.
On an install outside the seal At least two lock holders are required on the door frame. Since the system is designed for doors with a height of 800 to 2200 mm, the number of lock holders spaced 75 mm apart is adapted to the size of the cabinet - a maximum of 16 locking points are possible.
Inside the seal the locking solution can be implemented with a three-point locking system. This consists of a bar lock with tongue in combination with a key escutcheon or swing handle. With the help of the newly developed adapter, these components can be connected to the H-profile plastic poles. The plastic connecting rods are clipped into the locking element without tools and attached to the inside of the door with special rod guides. A run-on shoe on both ends of the bar completes the three-point locking. When opening and closing, it is inserted into a locking plate at the top and bottom with a stroke of 23,5 mm. Changing the hinges of the door is also possible without any problems. All you have to do is move the locking plates.
At the trapezoidal contour rod guide and bolt holder slide into each other. The door aligns exactly horizontally when it is closed. This ensures that the door is always in the correct position in relation to the frame. In addition, the symmetrical arrangement of the locking components on the housing allows the door to be easily changed to the right or left.
03.05.2022/XNUMX/XNUMX | The optimized locking system for the switch cabinet from Emka from Velbert is light, corrosion-resistant and inexpensive. The specialist for locking technology has equipped its locking system with significantly higher strength values. The connecting rods are made of glass fiber reinforced polyamide and thus offer unprecedented stability.
For larger housings and control cabinets and for control cabinets with a Doors height up to 2,2 meters closures outside the seal with multi-point locking have proven themselves for decades. For the necessary stability, the rear bar systems usually consist of Metal. However, they are susceptible to corrosion and more expensive, and have unfavorable electrical conductivity. The alternative of the Emka experts from Velbert are closure components made of technical or glass fiber reinforced plastic. They manage the balancing act between robustness, efficient handling and lower costs.
The multi-point locking technology for seals outside the doors is available in two different sets. These differ only by the respectively used lever handle. The different lengths of the lever handles require different hole patterns.
There are three actuations to choose from for locking the handles: Profile half cylinder, round cylinder and double beard. The assembly of handle with actuation, rod guides and clip-in connecting rods is done quickly. When opening and closing the switching or other cabinet door, the connecting rods with a stroke of 18 mm are pushed in or out in the lock holders attached to the door frame. The connecting rods are available in two lengths, which can be variably and quickly shortened. All plastic parts are black as standard.
04.05.2020 | The specialist for Mold making and Locking systemsEmka Fitting parts presents a new one Access control for passive outdoor cabinets. In addition, swivel handles, fasteners, turn-lock fasteners and electromechanical fasteners as well as molds and product samples from the mold making and casting portfolio are presented. They are used in control cabinet construction, electronics and mechanical engineering. The new system solutions include locking systems made of engineering plastic for Control Cabinets up to Protection class IP 65.
As a novelty, there is a locking solution for passive outdoor control cabinets or telecommunications housings or multifunction housings (MFG). Due to increasing attacks by hackers and saboteurs, the closure is of great importance as a swivel handle for the outdoor housing. To the controlled access To ensure for authorized persons, the power supply takes place via inductive power supply on demand and the release via Bluetooth-based smartphone app. The administration, in particular the definition of individual access authorizations, and the monitoring are done from a central point via management software.
The mold making specialist recently had one economical alternative Developed for metal-manufactured locking systems with multi-point locking for control cabinets. The mold making solutions in plastics technology offer efficient handling with full IP protection. A connecting rod made of fiberglass-reinforced polyamide ensures safe and stable properties.
The user operates the drive point centrally using a key plate or lever handle and thus moves the rods synchronously into the locking positions where the locking elements (pastilles) into the corresponding closure holders. This meets all the requirements for a multi-point locking system. Thanks to the modular design of the locking system, users have a selection of door locks to choose from – from the short key escutcheon to a new long key escutcheon through to the lever handle. Optionally, the lever handles can be equipped with a push button, round or profile half cylinder. All handle variants are available with or without preparation for additional padlocks.
The mold maker is known for his manufacture and manufacture of zinc die casting, aluminum die casting, stainless steel investment casting or plastic injection molding and shows his spectrum of high quality molds and selected product samples from plastic, zinc and aluminum. More than 700 employees manufacture fittings manufactured in mold construction using injection molding and other casting methods in the plants in Bosnia.
With more than 95 CNC machines in production and manufacture on a production area of around 35.000 m², Emka is one of the largest mold construction manufacturers in Europe. Emka not only manufactures products for the catalog range, but also sees itself as a bilateral development partner for its customers. All of the materials mentioned are processed into prototypes, initial samples and pilot series through to large series. Well-known OEMs such as Mercedes, Audi, Porsche and Fischer Sports have up to 900 molds and the resulting products manufactured at Emka every year.
18.01.2011/XNUMX/XNUMX | Emka Beschlagteile has developed and proven for the POS chest hinges set up new tools. The over-the-counter hinge can be ordered with different spring forces. The required torque can be set using a nut located in the lower part of the hinge. The lid remains in any position. Cover caps can be easily slipped on after assembly. The hinges are available from stock for a lid weight of 6 to 23 kg.