Hannover Messe Hall 16, Stand H17
Cotter pins prove themselves daily wherever constructions quickly installed, disassembled, or need to be changed. Therefore, they are in different design and dimensions of the standard range of GanderThat the diversity of the Pins GN GN 214.2 214.3 and extended again. A typical application is the use as a height adjustment.
Instead of the handle knob for the handling, the new cotter pins with a pull ring. This interpretation is always advantageous if the space is tight, because the ring can then be folded away laterally. The pull ring also allows simple attachment of the tether GN 111.2 that protects the bolt from loss.
It is the lock pin in the steel version (GN 214.2) and stainless steel (GN 214.3), if special applications requiring corrosive environments or areas with increased hygiene requirements. Both versions are available with pin diameters of up 6 16 mm. As with all socket pins of the provider allows the pawls activated by a red dyed and instantly recognizable nylon snap.
By the rectangular shape of the pawls from a stainless steel sheet instead of the linear contact points results in a ball-shaped locking bolt. It can accommodate a relatively high axial forces and thus prevents accidental release of the connection. Only by manually pressing the button, the latches and push the release bolts can be pulled off. According to this principle, the types GN 114.2 (steel with PA-knob), GN 114.3 work (stainless steel with PA-knob) and GN 114.6 in complete stainless steel version.