Online magazine for design and development

Here you will find everything that the designer needs for his design and the development engineer for his new development, from the draft to quality assurance in production, such as new products, their applications, new technologies or research results. Company reports as well as topics on technological and megatrends in all industrial sectors complete our range of industry news. Let's start with the news.

Company News

Ebm-Papst wants to sell industrial drive technology to Siemens
The Ebm-Papst Group has announced that it will sell its Industrial Drive Technology (IDT) division to Siemens AG. Both sides have signed a corresponding agreement.
Jumo's new Sensilo plant construction is progressing
Jumo is building a factory in the technology park for the production of temperature and pressure sensors with a production area of ​​around 13 m². At around 000 million euros, the new building is the largest investment in the company's history.
3DExperience Word 2024 in Dallas
At 3DExperience World 2024 in February in Dallas, Texas, Dassault Systèmes celebrated the event's 25th anniversary. The annual user meeting supports the global community in the development of future-proof products and processes.
Michael Koch GmbH moves into a new workshop
There is now more space available in Michael Koch's “Factory” for the assembly of customer- and machine-specific safe braking resistors. The new, modern hall was recently “taken by storm” by the employees.
Elon Musk is suing OpenAI for profit-making
Elon Musk files a lawsuit against OpenAI and CEO Sam Altman, accusing them of breach of contract because the company, which was originally designed as a nonprofit, is now operating for profit.
AREAS OF EXPERTISE

Industry news for your design and development from the specialist areas

communication technology

communication technology

World's first Omlox testing laboratory put into operation

The first Omlox testing laboratory in the world has been launched. The PI granted the Fraunhofer Institute Lemgo approval as a PI test laboratory for Omlox.

To the post

switch cabinet

switch cabinet

On to the intelligent drive train for predictive maintenance

The Roba-brake-checker module or the torque-measuring shaft coupling from Mayr ensure intelligent safety in smart production.

To the post

plastics

plastics

The first 100 Igus bikes hit the streets

The first 100 Igus Urban Bikes hit the streets and an in-house production facility with a capacity of 10.000 bicycles is set up in Cologne.

To the post

Couplings

Couplings

Torque measuring shaft coupling

The smart steel multi-plate coupling Roba-drive-checker from Mayr can do more than just transmit torque and compensate for shaft misalignment.

To the post

INDUSTRY SPECIALS

Industry news for your design and development from the branches

food technology

food technology

Lubrication and sealing-optimized linear guide

Schaeffler presents linear guides for food technology with optimized seals, wipers and long-term lubrication units.

To the post

Mobile Machinery

Mobile Machinery

Flexible, customizable gateway for agricultural technology

IFM Electronic is presenting the Isobus Gateway at the Hannover Messe, which is designed for agricultural equipment and can be specifically adapted.

To the post

Energy Technology

Energy Technology

All Electric Society – vision of the future of connectivity

At the Hannover Messe Preview, Harting gives an outlook on the Hannover Messe and draws the future picture of an “All Electric Society”.

To the post

Inverter

Inverter

Certified servo controller with Profisafe interface

At Logimat, Wittenstein is presenting a safety-certified servo controller with a Profisafe interface and integrated safety card for AGVs.

To the post

EXHIBITION SPECIALS

Industry fair news

Hannover Messe promotes energy for sustainable industry
As a networked industrial ecosystem, the exhibitors demonstrate how climate neutrality can be achieved through the use of electrification, digitalization and automation under the guiding theme of Energizing a sustainable Industry.
Control Fair 2024 | The industry is already looking forward to Stuttgart
Control 2024, the important international trade fair for quality assurance, will take place from April 23rd to 26th in Stuttgart. The trade fair places a particular focus on automation and digitalization.
SPS Nuremberg: Now in 16 halls!
The SPS – Smart Production Solutions from November 14th to 16.11th. 2023 will see significant growth in the trade fair compared to the previous year and is on the way to pre-Corona levels.

rauscher0117GigE Vision has long been an integral part of the world of image processing. However, the 120 MB / s transfer performance of GigE slows down current cameras. "Nbase-T" from Rauscher increases the transfer performance without compression from 1 Gbps to 5 Gbps when using the same cables and the same software.


Following the launch of GigE Vision in the year 2006, today, following an AIA study on 50,% of all new cameras are equipped with the GigE Vision Interface. Of course, all other camera interfaces have their applications and markets. For a broad range of applications, however, today GigE Vision is preferred. The advantages of the cost-effective interface in terms of cabling, stability, suitability for multi-camera setups, manufacturer-independent standardization and costs are well known.


Ethernet switches | The data driver in the network


What 10 has proven to be good and stable worldwide for years, however, is beginning to reveal a certain weakness in new applications today. The transfer performance of approx. 120 MB / s before 10 years was equal to the bandwidth requirements of former sensors. Especially in recent years, however, the sensor development has made great leaps and the trends of the new sensors fuel the bandwidth requirement. More and more resolution, the change from CCD to fast CMOS sensors and an increased occurrence of color or even hyperspectral sensors cause GigE to reach its performance limit more and more often. Current CMOS sensors from Sony and Onsemi are in areas of 400 MB / s and are throttled accordingly by GigE Vision.

Accelerate GigE Vision

In order to not be slowed down by the limited transfer performance of 120 MB / s and still use GigE Vision with its advantages, some camera manufacturers have been offering compression technologies for some time now: The image data is compressed in the camera and transmitted as encoded content via standard GigE. According to the manufacturers, factor 2 to 4 can be used to press more data onto GigE's 1 Gbps bandwidth. However, this compression is always dependent on the image content and on the side of the PC of course, a software decompression must take place before the image analysis.


In order to close the bandwidth gap between GigE and the current sensors, without having to compress image data and without having to change to a new interface, a standard called Nbase-T comes into play.


Nbase-T is an Ethernet standard that works on the same physical layer as GigE, but is accelerated by the factor 2.5 or 5.0. So data is transmitted via the same RJ45 connector, over existing CAT5e / CAT6 cabling up to 100 m length uncompressed with the unchanged GigE Vision protocol up to 500 MB / s.

Who is behind Nbase-T?

Of course, the Nbase-T standard is not driven by the imaging industry, but by a consortium of more than 60 companies, including prominent names such as Intel, Cisco, Xilinx, Marvell, Qualcom. The need for higher transmission rates over existing CAT5e / CAT6 cabling is given in the same way in the IT environment by the approximately 700 mm km of copper cables that are laid today in office complexes, research centers, residential areas, etc. After building wireless connections to the next access point with up to 5 Gbps using mobile devices today, they have evolved into 1GBps bottle-necks in the existing network infrastructure. So here is a massive need for a significant increase in bandwidth. However, 10 GigE requires either fiber optic transmission or CAT6a cabling to take full advantage of 100 m. Changing the physical media for 10GigE would cost a tremendous amount of money and costs, so the industry's goal is to significantly increase bandwidth to existing media. Nbase-T is therefore driven by a large industry with a huge target market.

What's in it for the image processor?

One of the huge advantages of the GigE Vision protocol, which is rather invisible in practical application, is the complete independence from the physical Ethernet layer. Because Nbase-T only changes this, GigE Vision 100% can be transparently transferred without software or firmware having to be adapted. A mechanism, which one already uses today, if GigE Vision cameras z. B. merge on a 10 GigE switch or wirelessly transmitted via Wifi.


The advantages are obvious: By using only one Nbase-T transmitter (the camera) and one Nbase-T receiver (the network card), an uncompressed high-speed image transfer can be implemented, which is 100% based on GigE Vision software.


Image processing software can therefore be used exactly as it is today. A Nbase-T network card is reported in the operating system as a standard Ethernet adapter, a Nbase-T camera as a standard Ethernet participant. The entire GigE Vision protocol runs as usual - just with 500 MB / s. All advantages such as long cable runs, distributed systems, Power over Ethernet for power supply, IEEExnumx Precision Time protocol for real-time triggers over the data line, autonegotiation of the transmission speed and even the mixed operation of devices with different speeds or different media (cable / wireless) is still possible ,

Components for camera developers and users

Nbase-T is quickly gaining a foothold in the IT industry and Nbase-T products are standard, such as network cards, switches, PHY devices, protocol analyzers and Ethernet controllers.
There are two product categories specifically for image processing: Pleora as a member of the Nbase-T consortium shows a Nbase-T camera interface for OEMs. Developers of special cameras or other imaging devices such as flat-panel detectors can thus seamlessly integrate the finished Nbase-T interface and thus immediately increase the data throughput to 5 GBps. This Pleora technology is also available as an FPGA IP core if it is to be integrated with 100% on its own hardware.


E2v also sees the need for more data throughput: the modern line scan cameras of the Eliixa + and Uniiqa + series deliver 2k or 4k resolution in monochrome with up to 140 kHz (> 560 MB / s) or in color with up to 100 kHz. Applications with line scan cameras in particular often require long cable runs and multi-camera systems are also often found. As a result, the call for network transmission for these cameras became louder and louder. However, when stepping up to 10GigE with external CL-10Gig fiber-optic converters, this can only be implemented at high cost, or for 1GigE only if the line rate is drastically reduced. The new models with Nbase-T combine all the advantages: high transfer performance and long cable lengths and, at the same time, the possibility of continuing to use existing software unchanged using any libraries.

Performance quintupled

So Nbase-T is not yet another new interface for the Machine Vision Community. It is a technology from the IT industry, which increases the efficiency of GigE Vision by the factor 5 on existing infrastructure. Without having to re-learn or develop things, users benefit from the high speed in combination with the elegant and inexpensive wiring of a CAT5e / CAT6 cable and the proven GigE Vision protocol.